Redis is an open-source, in-memory key-value data store. A key-value data store is a type of NoSQL database in which keys serve as unique identifiers for their associated values. Any given Redis instance includes a number of databases, each of which can hold many different keys of a variety of data types. In this tutorial, we will go over how to select a database, move keys between databases, and manage and delete keys.
This guide is written as a cheat sheet with self-contained examples. We encourage you to jump to any section that is relevant to the task you’re trying to complete.
The commands shown in this guide were tested on an Ubuntu 18.04 server running Redis version 4.0.9. To set up a similar environment, you can follow Step 1 of our guide on How To Install and Secure Redis on Ubuntu 18.04. We will demonstrate how these commands behave by running them with
redis-cli, the Redis command line interface. Note that if you’re using a different Redis interface — Redli, for example — the exact output of certain commands may differ.
Alternatively, you could provision a managed Redis database instance to test these commands, but note that depending on the level of control allowed by your database provider, some commands in this guide may not work as described. To provision a DigitalOcean Managed Database, follow our Managed Databases product documentation. Then, you must either install Redli or set up a TLS tunnel in order to connect to the Managed Database over TLS.
Out of the box, a Redis instance supports 16 logical databases. These databases are effectively siloed off from one another, and when you run a command in one database it doesn’t affect any of the data stored in other databases in your Redis instance.
Redis databases are numbered from
15 and, by default, you connect to database
0 when you connect to your Redis instance. However, you can change the database you’re using with the
select command after you connect:
- select 15
If you’ve selected a database other than
0, it will be reflected in the
To swap all the data held in one database with the data held in another, use the
swapdb command. The following example will swap the data held in database
6 with that in database
8, and any clients connected to either database will be able to see changes immediately:
- swapdb 6 8
swapdb will return
OK if the swap is successful.
If you want to move a key to a different Redis instance, you can run
migrate. This command ensures the key exists on the target instance before deleting it from the source instance. When you run
migrate, the command must include the following elements in this order:
- migrate 203.0.113.0 6379 key_1 7 8000
migrate allows the following options which you can add after the timeout argument:
COPY: Specifies that the key should not be deleted from the source instance
REPLACE: Specifies that if the key already exists on the destination, the
migrateoperation should delete and replace it
KEYS: Instead of providing a specific key to migrate, you can enter an empty string (
"") and then use the syntax from the
keyscommand to migrate any key that matches a pattern. For more information on how
keysworks, see our tutorial on How To Troubleshoot Issues in Redis.
There are a number of Redis commands that are useful for managing keys regardless of what type of data they hold. We’ll go over a few of these in this section.
rename will rename the specified key. If it’s successful, it will return
- rename old_key new_key
You can use
randomkey to return a random key from the currently selected database:
type to determine what type of data the given key holds. This command’s output can be either
- type key_1
If the specified key doesn’t exist,
type will return
You can move an individual key to another database in your Redis instance with the
move takes the name of a key and the database where you want to move the key as arguments. For example, to move the key
key_1 to database
8, you would run the following:
- move key_1 8
move will return
OK if moving the key was successful.
To delete one or more keys of any data type, use the
del command followed by one or more keys that you want to delete:
- del key_1 key_2
If this command deletes the key(s) successfully it will return
(integer) 1. Otherwise, it will return
unlink command performs a similar function as
del, with the difference being that
del blocks the client as the server reclaims the memory taken up by the key. If the key being deleted is associated with a small object, the amount of time it takes for
del to reclaim the memory is very small and the blocking time may not even be noticeable.
However, it can become inconvenient if, for example, the key you’re deleting is associated with many objects, such as a hash with thousands or millions of fields. Deleting such a key can take a noticeably long time, and you’ll be blocked from performing any other operations until it’s fully removed from the server’s memory.
unlink, however, first determines the cost of deallocating the memory taken up by the key. If it’s small then
unlink functions the same way as
del by the key immediately while also blocking the client. However, if there’s a high cost to deallocate memory for a key,
unlink will delete the key asynchronously by creating another thread and incrementally reclaim memory in the background without blocking the client:
- unlink key_1
Since it runs in the background, it’s generally recommended that you use
unlink to remove keys from your server to reduce errors on your clients, though
del will also suffice in many cases.
Warning: The following two commands are considered dangerous. The
flushall commands will irreversibly delete all the keys in a single database and all the keys in every database on the Redis server, respectively. We recommend that you only run these commands if you are absolutely certain that you want to delete all the keys in your database or server.
It may be in your interest to rename these commands to something with a lower likelihood of being run accidentally.
To delete all the keys in the selected database, use the
To delete all the keys in every database on a Redis server (including the currently selected database), run
flushall accept the
async option, which allows you to delete all the keys on a single database or every database in the cluster asynchronously. This allows them to function similarly to the
unlink command, and they will create a new thread to incrementally free up memory in the background.
To create a backup of the currently selected database, you can use the
This will export a snapshot of the current dataset as an
.rdb file, which is a database dump file that holds the data in an internal, compressed serialization format.
save runs synchronously and will block any other clients connected to the database. Hence, the
save command documentation recommends that this command should almost never be run in a production environment. Instead, it suggests using the
bgsave command. This tells Redis to fork the database: the parent will continue to serve clients while the child process saves the database before exiting:
Note that if clients add or modify data while the
bgsave operation is occurring, these changes won’t be captured in the snapshot.
You can also edit the Redis configuration file to have Redis save a snapshot automatically (known as snapshotting or RDB mode) after a certain amount of time if a minimum number of changes were made to the database. This is known as a save point. The following save point settings are enabled by default in the
. . . save 900 1 save 300 10 save 60 10000 . . . dbfilename "nextfile.rdb" . . .
With these settings, Redis will export a snapshot of the database to the file defined by the
dbfilename parameter every 900 seconds if at least 1 key is changed, every 300 seconds if at least 10 keys are changed, and every 60 seconds if at least 10000 keys are changed.
You can use the
shutdown command to back up your Redis data and then close your connection. This command will block every client connected to the database and then perform a
save operation if at least one save point is configured, meaning that it will export the database in its current state to an
.rdb file while preventing clients from making any changes.
shutdown command will flush changes to Redis’s append-only file before quitting if append-only mode is enabled. The append-only file mode (AOF) involves creating a log of every write operation on the server in a file ending in
.aof after every snapshot. AOF and RDB modes can be enabled on the same server, and using both persistence methods is an effective way to back up your data.
In short, the
shutdown command is essentially a blocking
save command that also flushes all recent changes to the append-only file and closes the connection to the Redis instance:
shutdown command is considered dangerous. By blocking your Redis server’s clients, you can make your data unavailable to users and applications that depend on it. We recommend that you only run this command if you are testing out Redis’s behavior or you are absolutely certain that you want to block all your Redis server’s clients.
In fact, it may be in your interest to rename this command to something with a lower likelihood of being run accidentally.
If you’ve not configured any save points but still want Redis to perform a
save operation, append the
save option to the
- shutdown save
If you have configured at least one save point but you want to shut down the Redis server without performing a save, you can add the
nosave argument to the command:
- shutdown nosave
Note that the append-only file can grow to be very long over time, but you can configure Redis to rewrite the file based on certain variables by editing the
redis.conf file. You can also instruct Redis to rewrite the append-only file by running the
bgrewriteaof will create the shortest set of commands needed to bring the database back to its current state. As this command’s name implies, it will run in the background. However, if another persistence command is running in a background process already, that command must finish before Redis will execute
This guide details a number of commands used to manage databases and keys. If there are other related commands, arguments, or procedures you’d like to see in this guide, please ask or make suggestions in the comments below.
For more information on Redis commands, see our tutorial series on How to Manage a Redis Database.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up
Redis is an open-source, in-memory key-value data store. A NoSQL database, Redis doesn’t use structured query language, otherwise known as SQL. Redis instead comes with its own set of commands for managing and accessing data.
The tutorials included in this series cover a broad range of Redis commands, but they generally focus on connecting to a Redis database, managing a variety of data types, and troubleshooting and debugging problems, along with a few other more specific functions. They are written in cheat sheet format with self-contained examples. We encourage you to jump to whichever guide is relevant to the task you’re trying to complete.