Redis is an open-source, in-memory key-value data store. Sets in Redis are collections of strings stored at a given key. When held in a set, an individual record value is referred to as a member. Unlike lists, sets are unordered and do not allow repeated values.
This tutorial explains how to create sets, retrieve and remove members, and compare the members of different sets.
This guide is written as a cheat sheet with self-contained examples. We encourage you to jump to any section that is relevant to the task you’re trying to complete.
The commands shown in this guide were tested on an Ubuntu 18.04 server running Redis version 4.0.9. To set up a similar environment, you can follow Step 1 of our guide on How To Install and Secure Redis on Ubuntu 18.04. We will demonstrate how these commands behave by running them with
redis-cli, the Redis command line interface. Note that if you’re using a different Redis interface — Redli, for example — the exact output of certain commands may differ.
Alternatively, you could provision a managed Redis database instance to test these commands, but note that depending on the level of control allowed by your database provider, some commands in this guide may not work as described. To provision a DigitalOcean Managed Database, follow our Managed Databases product documentation. Then, you must either install Redli or set up a TLS tunnel in order to connect to the Managed Database over TLS.
You can also use an interactive terminal that is embedded on this page to experiment with the sample Redis commands in this tutorial. Click the following
Launch an Interactive Terminal! button to get started.
sadd command allows you to create a set and add one or more members to it. The following example will create a set at a key named
key_horror with the members
- sadd key_horror "Frankenstein" "Godzilla"
sadd will return an integer showing how many members it added to the set:
If you try adding members of a set to a key that’s already holding a non-set value, it will return an error. The first command in this block creates a list named
key_action with one element,
"Shaft". The next command tries to add a set member,
"Shane", to the list, but this produces an error because of the clashing data types:
- rpush key_action "Shaft"
- sadd key_action "Shane"
Output(error) WRONGTYPE Operation against a key holding the wrong kind of value
Note that sets don’t allow more than one occurrence of the same member:
- sadd key_comedy "It's" "A" "Mad" "Mad" "Mad" "Mad" "Mad" "World"
Even though this
saddcommand specifies eight members, it discards four of the duplicate
"Mad" members resulting in a set size of 4.
In this section, we’ll go over a number of Redis commands that return information about the members held in a set. To practice the commands outlined here, run the following command, which will create a set with six members at a key called
- sadd key_stooges "Moe" "Larry" "Curly" "Shemp" "Joe" "Curly Joe"
To return every member from a set, run the
smembers command followed by the key you want to inspect:
- smembers key_stooges
Output1) "Curly" 2) "Moe" 3) "Larry" 4) "Shemp" 5) "Curly Joe" 6) "Joe"
To check if a specific value is a member of a set, use the
- sismember key_stooges "Harpo"
If the element
"Harpo" is a member of the
sismember will return
1. Otherwise, it will return
To see how many members are in a given set (in other words, to find the cardinality of a given set), run
- scard key_stooges
To return a random element from a set, run
- srandmember key_stooges
To return multiple random, distinct elements from a set, you can follow the
srandmember command with the number of elements you want to retrieve:
- srandmember key_stooges 3
Output1) "Larry" 2) "Moe" 3) "Curly Joe"
If you pass a negative number to
srandmember, the command is allowed to return the same element multiple times:
- srandmember key_stooges -3
Output1) "Shemp" 2) "Curly Joe" 3) "Curly Joe"
The random element function used in
srandmember is not perfectly random, although its performance improves in larger data sets. See the command’s official documentation for more details.
Redis comes with three commands used to remove members from a set:
spop randomly selects a specified number of members from a set and returns them, similar to
srandmember, but then deletes them from the set. It accepts the name of the key containing a set and the number of members to remove from the set as arguments. If you don’t specify a number,
spop will default to returning and removing a single value.
The following example command will remove and return two randomly-selected elements from the
key_stooges set created in the previous section:
- spop key_stooges 2
Output1) "Shemp" 2) "Larry"
srem allows you to remove one or more specific members from a set, rather than random ones:
- srem key_stooges "Joe" "Curly Joe"
Instead of returning the members removed from the set,
srem returns an integer showing how many members were removed:
smove to move a member from one set to another. This command accepts as arguments the source set, the destination set, and the member to move, in that order. Note that
smove only allows you to move one member at a time:
- smove key_stooges key_jambands "Moe"
If the command moves the member successfully, it will return
smove fails, it will instead return
(integer) 0. Note that if the destination key does not already exist,
smove will create it before moving the member into it.
Redis also provides a number of commands that find the differences and similarities between sets. To demonstrate how these work, this section will reference three sets named
beatles. If you’d like to try out the commands in this section yourself, create these sets and populate them using the following
- sadd presidents "George" "John" "Thomas" "James"
- sadd kings "Edward" "Henry" "John" "James" "George"
- sadd beatles "John" "George" "Paul" "Ringo"
sinter compares different sets and returns the set intersection, or values that appear in every set:
- sinter presidents kings beatles
Output1) "John" 2) "George"
sinterstore performs a similar function, but instead of returning the intersecting members it creates a new set at the specified destination containing these intersecting members. Note that if the destination already exists,
sinterstore will overwrite its contents:
- sinterstore new_set presidents kings beatles
- smembers new_set
Output1) "John" 2) "George"
sdiff returns the set difference — members resulting from the difference of the first specified set from each of the following sets:
- sdiff presidents kings beatles
In other words,
sdiff looks at each member in the first given set and then compares those to members in each successive set. Any member in the first set that also appears in the following sets is removed, and
sdiff returns the remaining members. Think of it as removing members of subsequent sets from the first set.
sdiffstore performs a function similar to
sdiff, but instead of returning the set difference it creates a new set at a given destination, containing the set difference:
- sdiffstore new_set beatles kings presidents
- smembers new_set
Output1) "Paul" 2) "Ringo"
sdiffstore will overwrite the destination key if it already exists.
sunion returns the set union, or a set containing every member of every set you specify:
- sunion presidents kings beatles
Output1) "Thomas" 2) "George" 3) "Paul" 4) "Henry" 5) "James" 6) "Edward" 7) "John" 8) "Ringo"
sunion treats the results like a new set in that it only allows one occurrence of any given member.
sunionstore performs a similar function, but creates a new set containing the set union at a given destination instead of just returning the results:
- sunionstore new_set presidents kings beatles
sunionstore will overwrite the destination key if it already exists.
This guide details a number of commands used to create and manage sets in Redis. If there are other related commands, arguments, or procedures you’d like to see outlined in this guide, please ask or make suggestions in the comments below.
For more information on Redis commands, see our tutorial series on How to Manage a Redis Database.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up
Redis is an open-source, in-memory key-value data store. A NoSQL database, Redis doesn’t use structured query language, otherwise known as SQL. Redis instead comes with its own set of commands for managing and accessing data.
The tutorials included in this series cover a broad range of Redis commands, but they generally focus on connecting to a Redis database, managing a variety of data types, and troubleshooting and debugging problems, along with a few other more specific functions. They are written in cheat sheet format with self-contained examples. We encourage you to jump to whichever guide is relevant to the task you’re trying to complete.