Vulkan Logo

21. Drawing Commands

Drawing commands (commands with Draw in the name) provoke work in a graphics pipeline. Drawing commands are recorded into a command buffer and when executed by a queue, will produce work which executes according to the bound graphics pipeline. A graphics pipeline must be bound to a command buffer before any drawing commands are recorded in that command buffer.

Drawing can be achieved in two modes:

Each draw is made up of zero or more vertices and zero or more instances, which are processed by the device and result in the assembly of primitives. Primitives are assembled according to the pInputAssemblyState member of the VkGraphicsPipelineCreateInfo structure, which is of type VkPipelineInputAssemblyStateCreateInfo:

// Provided by VK_VERSION_1_0
typedef struct VkPipelineInputAssemblyStateCreateInfo {
    VkStructureType                            sType;
    const void*                                pNext;
    VkPipelineInputAssemblyStateCreateFlags    flags;
    VkPrimitiveTopology                        topology;
    VkBool32                                   primitiveRestartEnable;
} VkPipelineInputAssemblyStateCreateInfo;
  • sType is the type of this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • flags is reserved for future use.

  • topology is a VkPrimitiveTopology defining the primitive topology, as described below.

  • primitiveRestartEnable controls whether a special vertex index value is treated as restarting the assembly of primitives. This enable only applies to indexed draws (vkCmdDrawIndexed, vkCmdDrawMultiIndexedEXT, and vkCmdDrawIndexedIndirect), and the special index value is either 0xFFFFFFFF when the indexType parameter of vkCmdBindIndexBuffer is equal to VK_INDEX_TYPE_UINT32, 0xFF when indexType is equal to VK_INDEX_TYPE_UINT8_EXT, or 0xFFFF when indexType is equal to VK_INDEX_TYPE_UINT16. Primitive restart is not allowed for “list” topologies, unless one of the features primitiveTopologyPatchListRestart (for VK_PRIMITIVE_TOPOLOGY_PATCH_LIST) or primitiveTopologyListRestart (for all other list topologies) is enabled.

Restarting the assembly of primitives discards the most recent index values if those elements formed an incomplete primitive, and restarts the primitive assembly using the subsequent indices, but only assembling the immediately following element through the end of the originally specified elements. The primitive restart index value comparison is performed before adding the vertexOffset value to the index value.

Valid Usage
  • VUID-VkPipelineInputAssemblyStateCreateInfo-topology-06252
    If topology is VK_PRIMITIVE_TOPOLOGY_POINT_LIST, VK_PRIMITIVE_TOPOLOGY_LINE_LIST, VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST, VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY or VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY, and primitiveRestartEnable is VK_TRUE, the primitiveTopologyListRestart feature must be enabled

  • VUID-VkPipelineInputAssemblyStateCreateInfo-topology-06253
    If topology is VK_PRIMITIVE_TOPOLOGY_PATCH_LIST, and primitiveRestartEnable is VK_TRUE, the primitiveTopologyPatchListRestart feature must be enabled

  • VUID-VkPipelineInputAssemblyStateCreateInfo-topology-00429
    If the geometryShader feature is not enabled, topology must not be any of VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY, VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY, VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY or VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY

  • VUID-VkPipelineInputAssemblyStateCreateInfo-topology-00430
    If the tessellationShader feature is not enabled, topology must not be VK_PRIMITIVE_TOPOLOGY_PATCH_LIST

  • VUID-VkPipelineInputAssemblyStateCreateInfo-triangleFans-04452
    If the VK_KHR_portability_subset extension is enabled, and VkPhysicalDevicePortabilitySubsetFeaturesKHR::triangleFans is VK_FALSE, topology must not be VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN

Valid Usage (Implicit)
  • VUID-VkPipelineInputAssemblyStateCreateInfo-sType-sType
    sType must be VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO

  • VUID-VkPipelineInputAssemblyStateCreateInfo-pNext-pNext
    pNext must be NULL

  • VUID-VkPipelineInputAssemblyStateCreateInfo-flags-zerobitmask
    flags must be 0

  • VUID-VkPipelineInputAssemblyStateCreateInfo-topology-parameter
    topology must be a valid VkPrimitiveTopology value

// Provided by VK_VERSION_1_0
typedef VkFlags VkPipelineInputAssemblyStateCreateFlags;

VkPipelineInputAssemblyStateCreateFlags is a bitmask type for setting a mask, but is currently reserved for future use.

To dynamically control whether a special vertex index value is treated as restarting the assembly of primitives, call:

// Provided by VK_EXT_extended_dynamic_state2
void vkCmdSetPrimitiveRestartEnableEXT(
    VkCommandBuffer                             commandBuffer,
    VkBool32                                    primitiveRestartEnable);
  • commandBuffer is the command buffer into which the command will be recorded.

  • primitiveRestartEnable controls whether a special vertex index value is treated as restarting the assembly of primitives. It behaves in the same way as VkPipelineInputAssemblyStateCreateInfo::primitiveRestartEnable

This command sets the primitive restart enable for subsequent drawing commands when the graphics pipeline is created with VK_DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE set in VkPipelineDynamicStateCreateInfo::pDynamicStates. Otherwise, this state is specified by the VkPipelineInputAssemblyStateCreateInfo::primitiveRestartEnable value used to create the currently active pipeline.

Valid Usage
Valid Usage (Implicit)
  • VUID-vkCmdSetPrimitiveRestartEnable-commandBuffer-parameter
    commandBuffer must be a valid VkCommandBuffer handle

  • VUID-vkCmdSetPrimitiveRestartEnable-commandBuffer-recording
    commandBuffer must be in the recording state

  • VUID-vkCmdSetPrimitiveRestartEnable-commandBuffer-cmdpool
    The VkCommandPool that commandBuffer was allocated from must support graphics operations

  • VUID-vkCmdSetPrimitiveRestartEnable-videocoding
    This command must only be called outside of a video coding scope

Host Synchronization
  • Host access to commandBuffer must be externally synchronized

  • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties
Command Buffer Levels Render Pass Scope Video Coding Scope Supported Queue Types Command Type

Primary
Secondary

Both

Outside

Graphics

State

21.1. Primitive Topologies

Primitive topology determines how consecutive vertices are organized into primitives, and determines the type of primitive that is used at the beginning of the graphics pipeline. The effective topology for later stages of the pipeline is altered by tessellation or geometry shading (if either is in use) and depends on the execution modes of those shaders. In the case of mesh shading the only effective topology is defined by the execution mode of the mesh shader.

The primitive topologies defined by VkPrimitiveTopology are:

// Provided by VK_VERSION_1_0
typedef enum VkPrimitiveTopology {
    VK_PRIMITIVE_TOPOLOGY_POINT_LIST = 0,
    VK_PRIMITIVE_TOPOLOGY_LINE_LIST = 1,
    VK_PRIMITIVE_TOPOLOGY_LINE_STRIP = 2,
    VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST = 3,
    VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP = 4,
    VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN = 5,
    VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY = 6,
    VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY = 7,
    VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY = 8,
    VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY = 9,
    VK_PRIMITIVE_TOPOLOGY_PATCH_LIST = 10,
} VkPrimitiveTopology;

Each primitive topology, and its construction from a list of vertices, is described in detail below with a supporting diagram, according to the following key:

image/svg+xml

Vertex

A point in 3-dimensional space. Positions chosen within the diagrams are arbitrary and for illustration only.

image/svg+xml 5

Vertex Number

Sequence position of a vertex within the provided vertex data.

image/svg+xml

Provoking Vertex

Provoking vertex within the main primitive. The tail is angled towards the relevant primitive. Used in flat shading.

image/svg+xml

Primitive Edge

An edge connecting the points of a main primitive.

image/svg+xml

Adjacency Edge

Points connected by these lines do not contribute to a main primitive, and are only accessible in a geometry shader.

image/svg+xml

Winding Order

The relative order in which vertices are defined within a primitive, used in the facing determination. This ordering has no specific start or end point.

The diagrams are supported with mathematical definitions where the vertices (v) and primitives (p) are numbered starting from 0; v0 is the first vertex in the provided data and p0 is the first primitive in the set of primitives defined by the vertices and topology.

To dynamically set primitive topology, call:

// Provided by VK_EXT_extended_dynamic_state
void vkCmdSetPrimitiveTopologyEXT(
    VkCommandBuffer                             commandBuffer,
    VkPrimitiveTopology                         primitiveTopology);
  • commandBuffer is the command buffer into which the command will be recorded.

  • primitiveTopology specifies the primitive topology to use for drawing.

This command sets the primitive topology for subsequent drawing commands when the graphics pipeline is created with VK_DYNAMIC_STATE_PRIMITIVE_TOPOLOGY set in VkPipelineDynamicStateCreateInfo::pDynamicStates. Otherwise, this state is specified by the VkPipelineInputAssemblyStateCreateInfo::topology value used to create the currently active pipeline.

Valid Usage
Valid Usage (Implicit)
  • VUID-vkCmdSetPrimitiveTopology-commandBuffer-parameter
    commandBuffer must be a valid VkCommandBuffer handle

  • VUID-vkCmdSetPrimitiveTopology-primitiveTopology-parameter
    primitiveTopology must be a valid VkPrimitiveTopology value

  • VUID-vkCmdSetPrimitiveTopology-commandBuffer-recording
    commandBuffer must be in the recording state

  • VUID-vkCmdSetPrimitiveTopology-commandBuffer-cmdpool
    The VkCommandPool that commandBuffer was allocated from must support graphics operations

  • VUID-vkCmdSetPrimitiveTopology-videocoding
    This command must only be called outside of a video coding scope

Host Synchronization
  • Host access to commandBuffer must be externally synchronized

  • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties
Command Buffer Levels Render Pass Scope Video Coding Scope Supported Queue Types Command Type

Primary
Secondary

Both

Outside

Graphics

State

21.1.1. Topology Class

The primitive topologies are grouped into the following topology classes:

Table 30. Topology classes
Topology Class Primitive Topology

Point

VK_PRIMITIVE_TOPOLOGY_POINT_LIST

Line

VK_PRIMITIVE_TOPOLOGY_LINE_LIST, VK_PRIMITIVE_TOPOLOGY_LINE_STRIP, VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY, VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY

Triangle

VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST, VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP, VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN, VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY, VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY

Patch

VK_PRIMITIVE_TOPOLOGY_PATCH_LIST

21.1.2. Point Lists

When the topology is VK_PRIMITIVE_TOPOLOGY_POINT_LIST, each consecutive vertex defines a single point primitive, according to the equation:

pi = {vi}

As there is only one vertex, that vertex is the provoking vertex. The number of primitives generated is equal to vertexCount.

image/svg+xml 0 4 2 1 3

21.1.3. Line Lists

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_LINE_LIST, each consecutive pair of vertices defines a single line primitive, according to the equation:

pi = {v2i, v2i+1}

The number of primitives generated is equal to vertexCount/2⌋.

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is v2i.

image/svg+xml 0 2 1 3

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is v2i+1.

image/svg+xml 0 2 1 3

21.1.4. Line Strips

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_LINE_STRIP, one line primitive is defined by each vertex and the following vertex, according to the equation:

pi = {vi, vi+1}

The number of primitives generated is equal to max(0,vertexCount-1).

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is vi.

image/svg+xml 0 2 1 3

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is vi+1.

image/svg+xml 0 2 1 3

21.1.5. Triangle Lists

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST, each consecutive set of three vertices defines a single triangle primitive, according to the equation:

pi = {v3i, v3i+1, v3i+2}

The number of primitives generated is equal to vertexCount/3⌋.

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is v3i.

image/svg+xml 2 1 0 3 5 4

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is v3i+2.

image/svg+xml 2 1 0 3 5 4

21.1.6. Triangle Strips

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP, one triangle primitive is defined by each vertex and the two vertices that follow it, according to the equation:

pi = {vi, vi+(1+i%2), vi+(2-i%2)}

The number of primitives generated is equal to max(0,vertexCount-2).

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is vi.

image/svg+xml 0 4 2 1 3

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is vi+2.

image/svg+xml 0 4 2 1 3
Note

The ordering of the vertices in each successive triangle is reversed, so that the winding order is consistent throughout the strip.

21.1.7. Triangle Fans

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN, triangle primitives are defined around a shared common vertex, according to the equation:

pi = {vi+1, vi+2, v0}

The number of primitives generated is equal to max(0,vertexCount-2).

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is vi+1.

image/svg+xml 0 4 2 1 3

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is vi+2.

image/svg+xml 0 4 2 1 3
Note

If the VK_KHR_portability_subset extension is enabled, and VkPhysicalDevicePortabilitySubsetFeaturesKHR::triangleFans is VK_FALSE, then triangle fans are not supported by the implementation, and VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN must not be used.

21.1.8. Line Lists With Adjacency

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY, each consecutive set of four vertices defines a single line primitive with adjacency, according to the equation:

pi = {v4i, v4i+1, v4i+2,v4i+3}

A line primitive is described by the second and third vertices of the total primitive, with the remaining two vertices only accessible in a geometry shader.

The number of primitives generated is equal to vertexCount/4⌋.

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is v4i+1.

image/svg+xml 0 2 1 3 4 6 5 7

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is v4i+2.

image/svg+xml 0 2 1 3 4 6 5 7

21.1.9. Line Strips With Adjacency

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY, one line primitive with adjacency is defined by each vertex and the following vertex, according to the equation:

pi = {vi, vi+1, vi+2, vi+3}

A line primitive is described by the second and third vertices of the total primitive, with the remaining two vertices only accessible in a geometry shader.

The number of primitives generated is equal to max(0,vertexCount-3).

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is vi+1.

image/svg+xml 0 2 1 3 4 5

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is vi+2.

image/svg+xml 0 2 1 3 4 5

21.1.10. Triangle Lists With Adjacency

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY, each consecutive set of six vertices defines a single triangle primitive with adjacency, according to the equations:

pi = {v6i, v6i+1, v6i+2, v6i+3, v6i+4, v6i+5}

A triangle primitive is described by the first, third, and fifth vertices of the total primitive, with the remaining three vertices only accessible in a geometry shader.

The number of primitives generated is equal to vertexCount/6⌋.

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is v6i.

image/svg+xml 0 4 2 1 5 3 6 8 10 11 7 9

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is v6i+4.

image/svg+xml 0 4 2 1 5 3 6 8 10 11 7 9

21.1.11. Triangle Strips With Adjacency

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY, one triangle primitive with adjacency is defined by each vertex and the following 5 vertices.

The number of primitives generated, n, is equal to ⌊max(0, vertexCount - 4)/2⌋.

If n=1, the primitive is defined as:

p = {v0, v1, v2, v5, v4, v3}

If n>1, the total primitive consists of different vertices according to where it is in the strip:

pi = {v2i, v2i+1, v2i+2, v2i+6, v2i+4, v2i+3} when i=0

pi = {v2i, v2i+3, v2i+4, v2i+6, v2i+2, v2i-2} when i>0, i<n-1, and i%2=1

pi = {v2i, v2i-2, v2i+2, v2i+6, v2i+4, v2i+3} when i>0, i<n-1, and i%2=0

pi = {v2i, v2i+3, v2i+4, v2i+5, v2i+2, v2i-2} when i=n-1 and i%2=1

pi = {v2i, v2i-2, v2i+2, v2i+5, v2i+4, v2i+3} when i=n-1 and i%2=0

A triangle primitive is described by the first, third, and fifth vertices of the total primitive in all cases, with the remaining three vertices only accessible in a geometry shader.

Note

The ordering of the vertices in each successive triangle is altered so that the winding order is consistent throughout the strip.

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the provoking vertex for pi is always v2i.

image/svg+xml 0 4 2 1 5 3 2 6 5 7 7 8 9 7 8 10 9 11 0 4 1 3 2 6 5 0 4 1 3 2 6 5 0 4 1 3

When the provokingVertexMode is VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for pi is always v2i+4.

image/svg+xml 0 4 2 1 5 3 2 6 5 7 7 8 9 7 8 10 9 11 0 4 1 3 2 6 5 0 4 1 3 2 6 5 0 4 1 3

21.1.12. Patch Lists

When the primitive topology is VK_PRIMITIVE_TOPOLOGY_PATCH_LIST, each consecutive set of m vertices defines a single patch primitive, according to the equation:

pi = {vmi, vmi+1, …​, vmi+(m-2), vmi+(m-1)}

where m is equal to VkPipelineTessellationStateCreateInfo::patchControlPoints.

Patch lists are never passed to vertex post-processing, and as such no provoking vertex is defined for patch primitives. The number of primitives generated is equal to vertexCount/m⌋.

The vertices comprising a patch have no implied geometry, and are used as inputs to tessellation shaders and the fixed-function tessellator to generate new point, line, or triangle primitives.

21.2. Primitive Order

Primitives generated by drawing commands progress through the stages of the graphics pipeline in primitive order. Primitive order is initially determined in the following way:

  1. Submission order determines the initial ordering

  2. For indirect drawing commands, the order in which accessed instances of the VkDrawIndirectCommand are stored in buffer, from lower indirect buffer addresses to higher addresses.

  3. If a drawing command includes multiple instances, the order in which instances are executed, from lower numbered instances to higher.

  4. The order in which primitives are specified by a drawing command:

    • For non-indexed draws, from vertices with a lower numbered vertexIndex to a higher numbered vertexIndex.

    • For indexed draws, vertices sourced from a lower index buffer addresses to higher addresses.

    • For draws using mesh shaders, the order is provided by mesh shading.

Within this order implementations further sort primitives:

  1. If tessellation shading is active, by an implementation-dependent order of new primitives generated by tessellation.

  2. If geometry shading is active, by the order new primitives are generated by geometry shading.

  3. If the polygon mode is not VK_POLYGON_MODE_FILL, or VK_POLYGON_MODE_FILL_RECTANGLE_NV, by an implementation-dependent ordering of the new primitives generated within the original primitive.

Primitive order is later used to define rasterization order, which determines the order in which fragments output results to a framebuffer.

21.3. Programmable Primitive Shading

Once primitives are assembled, they proceed to the vertex shading stage of the pipeline. If the draw includes multiple instances, then the set of primitives is sent to the vertex shading stage multiple times, once for each instance.

It is implementation-dependent whether vertex shading occurs on vertices that are discarded as part of incomplete primitives, but if it does occur then it operates as if they were vertices in complete primitives and such invocations can have side effects.

Vertex shading receives two per-vertex inputs from the primitive assembly stage - the vertexIndex and the instanceIndex. How these values are generated is defined below, with each command.

Drawing commands fall roughly into two categories:

To bind an index buffer to a command buffer, call:

// Provided by VK_VERSION_1_0
void vkCmdBindIndexBuffer(
    VkCommandBuffer                             commandBuffer,
    VkBuffer                                    buffer,
    VkDeviceSize                                offset,
    VkIndexType                                 indexType);
  • commandBuffer is the command buffer into which the command is recorded.

  • buffer is the buffer being bound.

  • offset is the starting offset in bytes within buffer used in index buffer address calculations.

  • indexType is a VkIndexType value specifying the size of the indices.

Valid Usage
  • VUID-vkCmdBindIndexBuffer-offset-00431
    offset must be less than the size of buffer

  • VUID-vkCmdBindIndexBuffer-offset-00432
    The sum of offset and the address of the range of VkDeviceMemory object that is backing buffer, must be a multiple of the type indicated by indexType

  • VUID-vkCmdBindIndexBuffer-buffer-00433
    buffer must have been created with the VK_BUFFER_USAGE_INDEX_BUFFER_BIT flag

  • VUID-vkCmdBindIndexBuffer-buffer-00434
    If buffer is non-sparse then it must be bound completely and contiguously to a single VkDeviceMemory object

  • VUID-vkCmdBindIndexBuffer-indexType-02507
    indexType must not be VK_INDEX_TYPE_NONE_KHR

  • VUID-vkCmdBindIndexBuffer-indexType-02765
    If indexType is VK_INDEX_TYPE_UINT8_EXT, the indexTypeUint8 feature must be enabled

Valid Usage (Implicit)
  • VUID-vkCmdBindIndexBuffer-commandBuffer-parameter
    commandBuffer must be a valid VkCommandBuffer handle

  • VUID-vkCmdBindIndexBuffer-buffer-parameter
    buffer must be a valid VkBuffer handle

  • VUID-vkCmdBindIndexBuffer-indexType-parameter
    indexType must be a valid VkIndexType value

  • VUID-vkCmdBindIndexBuffer-commandBuffer-recording
    commandBuffer must be in the recording state

  • VUID-vkCmdBindIndexBuffer-commandBuffer-cmdpool
    The VkCommandPool that commandBuffer was allocated from must support graphics operations

  • VUID-vkCmdBindIndexBuffer-videocoding
    This command must only be called outside of a video coding scope

  • VUID-vkCmdBindIndexBuffer-commonparent
    Both of buffer, and commandBuffer must have been created, allocated, or retrieved from the same VkDevice

Host Synchronization
  • Host access to commandBuffer must be externally synchronized

  • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties
Command Buffer Levels Render Pass Scope Video Coding Scope Supported Queue Types Command Type

Primary
Secondary

Both

Outside

Graphics

State

Possible values of vkCmdBindIndexBuffer::indexType, specifying the size of indices, are:

// Provided by VK_VERSION_1_0
typedef enum VkIndexType {
    VK_INDEX_TYPE_UINT16 = 0,
    VK_INDEX_TYPE_UINT32 = 1,
  // Provided by VK_KHR_acceleration_structure
    VK_INDEX_TYPE_NONE_KHR = 1000165000,
  // Provided by VK_EXT_index_type_uint8
    VK_INDEX_TYPE_UINT8_EXT = 1000265000,
  // Provided by VK_NV_ray_tracing
    VK_INDEX_TYPE_NONE_NV = VK_INDEX_TYPE_NONE_KHR,
} VkIndexType;
  • VK_INDEX_TYPE_UINT16 specifies that indices are 16-bit unsigned integer values.

  • VK_INDEX_TYPE_UINT32 specifies that indices are 32-bit unsigned integer values.

  • VK_INDEX_TYPE_NONE_KHR specifies that no indices are provided.

  • VK_INDEX_TYPE_UINT8_EXT specifies that indices are 8-bit unsigned integer values.

The parameters for each drawing command are specified directly in the command or read from buffer memory, depending on the command. Drawing commands that source their parameters from buffer memory are known as indirect drawing commands.

All drawing commands interact with the robustBufferAccess feature.

To record a non-indexed draw, call:

// Provided by VK_VERSION_1_0
void vkCmdDraw(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    vertexCount,
    uint32_t                                    instanceCount,
    uint32_t                                    firstVertex,
    uint32_t                                    firstInstance);
  • commandBuffer is the command buffer into which the command is recorded.

  • vertexCount is the number of vertices to draw.

  • instanceCount is the number of instances to draw.

  • firstVertex is the index of the first vertex to draw.

  • firstInstance is the instance ID of the first instance to draw.

When the command is executed, primitives are assembled using the current primitive topology and vertexCount consecutive vertex indices with the first vertexIndex value equal to firstVertex. The primitives are drawn instanceCount times with instanceIndex starting with firstInstance and increasing sequentially for each instance. The assembled primitives execute the bound graphics pipeline.

Valid Usage
  • VUID-vkCmdDraw-magFilter-04553
    If a VkSampler created with magFilter or minFilter equal to VK_FILTER_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDraw-mipmapMode-04770
    If a VkSampler created with mipmapMode equal to VK_SAMPLER_MIPMAP_MODE_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDraw-None-06479
    If a VkImageView is sampled with depth comparison, the image view’s format features must contain VK_FORMAT_FEATURE_2_SAMPLED_IMAGE_DEPTH_COMPARISON_BIT

  • VUID-vkCmdDraw-None-02691
    If a VkImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT

  • VUID-vkCmdDraw-None-02692
    If a VkImageView is sampled with VK_FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT

  • VUID-vkCmdDraw-filterCubic-02694
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT as a result of this command must have a VkImageViewType and format that supports cubic filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDraw-filterCubicMinmax-02695
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT with a reduction mode of either VK_SAMPLER_REDUCTION_MODE_MIN or VK_SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a VkImageViewType and format that supports cubic filtering together with minmax filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDraw-flags-02696
    Any VkImage created with a VkImageCreateInfo::flags containing VK_IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a VkSamplerAddressMode of VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE

  • VUID-vkCmdDraw-OpTypeImage-07027
    For any VkImageView being written as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDraw-OpTypeImage-07028
    For any VkImageView being read as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDraw-OpTypeImage-07029
    For any VkBufferView being written as a storage texel buffer where the image format field of the OpTypeImage is Unknown, the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDraw-OpTypeImage-07030
    Any VkBufferView being read as a storage texel buffer where the image format field of the OpTypeImage is Unknown then the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDraw-None-02697
    For each set n that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a VkPipelineLayout that is compatible for set n, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDraw-maintenance4-06425
    If the maintenance4 feature is not enabled, then for each push constant that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a VkPipelineLayout that is compatible for push constants, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDraw-None-08114
    Descriptors in each bound descriptor set, specified via vkCmdBindDescriptorSets, must be valid if they are statically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was not created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDraw-None-08115
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdBindDescriptorSets, the bound VkPipeline must have been created without VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDraw-None-08116
    Descriptors in bound descriptor buffers, specified via vkCmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDraw-None-08117
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdSetDescriptorBufferOffsetsEXT, the bound VkPipeline must have been created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDraw-None-08119
    If a descriptor is dynamically used with a VkPipeline created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident

  • VUID-vkCmdDraw-None-02700
    A valid pipeline must be bound to the pipeline bind point used by this command

  • VUID-vkCmdDraw-commandBuffer-02701
    If the VkPipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set or inherited (if the VK_NV_inherited_viewport_scissor extension is enabled) for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic

  • VUID-vkCmdDraw-None-02859
    There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the VkPipeline object bound to the pipeline bind point used by this command, since that pipeline was bound

  • VUID-vkCmdDraw-None-02702
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used to sample from any VkImage with a VkImageView of the type VK_IMAGE_VIEW_TYPE_3D, VK_IMAGE_VIEW_TYPE_CUBE, VK_IMAGE_VIEW_TYPE_1D_ARRAY, VK_IMAGE_VIEW_TYPE_2D_ARRAY or VK_IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage

  • VUID-vkCmdDraw-None-02703
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage

  • VUID-vkCmdDraw-None-02704
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage

  • VUID-vkCmdDraw-uniformBuffers-06935
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for uniformBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDraw-storageBuffers-06936
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a storage buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for storageBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDraw-commandBuffer-02707
    If commandBuffer is an unprotected command buffer and protectedNoFault is not supported, any resource accessed by the VkPipeline object bound to the pipeline bind point used by this command must not be a protected resource

  • VUID-vkCmdDraw-None-06550
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must only be used with OpImageSample* or OpImageSparseSample* instructions

  • VUID-vkCmdDraw-ConstOffset-06551
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must not use the ConstOffset and Offset operands

  • VUID-vkCmdDraw-viewType-07752
    If a VkImageView is accessed as a result of this command, then the image view’s viewType must match the Dim operand of the OpTypeImage as described in Instruction/Sampler/Image View Validation

  • VUID-vkCmdDraw-format-07753
    If a VkImageView is accessed as a result of this command, then the image view’s format must match the numeric format from the Sampled Type operand of the OpTypeImage as described in the SPIR-V Sampled Type column of the Interpretation of Numeric Format table

  • VUID-vkCmdDraw-None-04115
    If a VkImageView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the image view’s format

  • VUID-vkCmdDraw-OpImageWrite-04469
    If a VkBufferView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the buffer view’s format

  • VUID-vkCmdDraw-SampledType-04470
    If a VkImageView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDraw-SampledType-04471
    If a VkImageView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDraw-SampledType-04472
    If a VkBufferView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDraw-SampledType-04473
    If a VkBufferView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDraw-sparseImageInt64Atomics-04474
    If the sparseImageInt64Atomics feature is not enabled, VkImage objects created with the VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDraw-sparseImageInt64Atomics-04475
    If the sparseImageInt64Atomics feature is not enabled, VkBuffer objects created with the VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDraw-OpImageWeightedSampleQCOM-06971
    If OpImageWeightedSampleQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_SAMPLED_IMAGE_BIT_QCOM

  • VUID-vkCmdDraw-OpImageWeightedSampleQCOM-06972
    If OpImageWeightedSampleQCOM uses a VkImageView as a sample weight image as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_IMAGE_BIT_QCOM

  • VUID-vkCmdDraw-OpImageBoxFilterQCOM-06973
    If OpImageBoxFilterQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BOX_FILTER_SAMPLED_BIT_QCOM

  • VUID-vkCmdDraw-OpImageBlockMatchSSDQCOM-06974
    If OpImageBlockMatchSSDQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDraw-OpImageBlockMatchSADQCOM-06975
    If OpImageBlockMatchSADQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDraw-OpImageBlockMatchSADQCOM-06976
    If OpImageBlockMatchSADQCOM or OpImageBlockMatchSSDQCOM is used to read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation

  • VUID-vkCmdDraw-OpImageWeightedSampleQCOM-06977
    If OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDraw-OpImageWeightedSampleQCOM-06978
    If any command other than OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must not have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDraw-None-07288
    Any shader invocation executed by this command must terminate

  • VUID-vkCmdDraw-renderPass-02684
    The current render pass must be compatible with the renderPass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDraw-subpass-02685
    The subpass index of the current render pass must be equal to the subpass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDraw-None-07748
    If any shader statically accesses an input attachment, a valid descriptor must be bound to the pipeline via a descriptor set

  • VUID-vkCmdDraw-OpTypeImage-07468
    If any shader executed by this pipeline accesses an OpTypeImage variable with a Dim operand of SubpassData, it must be decorated with an InputAttachmentIndex that corresponds to a valid input attachment in the current subpass

  • VUID-vkCmdDraw-None-07469
    Input attachment views accessed in a subpass must be created with the same VkFormat as the corresponding subpass definition, and be created with a VkImageView that is compatible with the attachment referenced by the subpass' pInputAttachments[InputAttachmentIndex] in the currently bound VkFramebuffer as specified by Fragment Input Attachment Compatibility

  • VUID-vkCmdDraw-None-06537
    Memory backing image subresources used as attachments in the current render pass must not be written in any way other than as an attachment by this command

  • VUID-vkCmdDraw-None-06538
    If any recorded command in the current subpass will write to an image subresource as an attachment, this command must not read from the memory backing that image subresource in any other way than as an attachment

  • VUID-vkCmdDraw-None-06539
    If any recorded command in the current subpass will read from an image subresource used as an attachment in any way other than as an attachment, this command must not write to that image subresource as an attachment

  • VUID-vkCmdDraw-None-06886
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the depth aspect, depth writes must be disabled

  • VUID-vkCmdDraw-None-06887
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the stencil aspect, both front and back writeMask are not zero, and stencil test is enabled, all stencil ops must be VK_STENCIL_OP_KEEP

  • VUID-vkCmdDraw-maxMultiviewInstanceIndex-02688
    If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to VkPhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex

  • VUID-vkCmdDraw-sampleLocationsEnable-02689
    If the bound graphics pipeline was created with VkPipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to VK_TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set

  • VUID-vkCmdDraw-None-06666
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT dynamic state enabled then vkCmdSetSampleLocationsEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-viewportCount-03417
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, then vkCmdSetViewportWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must match the VkPipelineViewportStateCreateInfo::scissorCount of the pipeline

  • VUID-vkCmdDraw-scissorCount-03418
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, then vkCmdSetScissorWithCountEXT must have been called in the current command buffer prior to this drawing command, and the scissorCount parameter of vkCmdSetScissorWithCount must match the VkPipelineViewportStateCreateInfo::viewportCount of the pipeline

  • VUID-vkCmdDraw-viewportCount-03419
    If the bound graphics pipeline state was created with both the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic states enabled then both vkCmdSetViewportWithCountEXT and vkCmdSetScissorWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must match the scissorCount parameter of vkCmdSetScissorWithCount

  • VUID-vkCmdDraw-viewportCount-04137
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportWScalingStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-viewportCount-04138
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportWScalingNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-viewportCount-04139
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportShadingRateImageStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-viewportCount-04140
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportShadingRatePaletteNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-VkPipelineVieportCreateInfo-04141
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportSwizzleStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-VkPipelineVieportCreateInfo-04142
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportExclusiveScissorStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportExclusiveScissorStateCreateInfoNV::exclusiveScissorCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-None-04876
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZER_DISCARD_ENABLE dynamic state enabled then vkCmdSetRasterizerDiscardEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-04877
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_BIAS_ENABLE dynamic state enabled then vkCmdSetDepthBiasEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-logicOp-04878
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LOGIC_OP_EXT dynamic state enabled then vkCmdSetLogicOpEXT must have been called in the current command buffer prior to this drawing command and the logicOp must be a valid VkLogicOp value

  • VUID-vkCmdDraw-primitiveFragmentShadingRateWithMultipleViewports-04552
    If the primitiveFragmentShadingRateWithMultipleViewports limit is not supported, the bound graphics pipeline was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, and any of the shader stages of the bound graphics pipeline write to the PrimitiveShadingRateKHR built-in, then vkCmdSetViewportWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must be 1

  • VUID-vkCmdDraw-blendEnable-04727
    If rasterization is not disabled in the bound graphics pipeline, then for each color attachment in the subpass, if the corresponding image view’s format features do not contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT, then the blendEnable member of the corresponding element of the pAttachments member of pColorBlendState must be VK_FALSE

  • VUID-vkCmdDraw-multisampledRenderToSingleSampled-07284
    If rasterization is not disabled in the bound graphics pipeline, and none of the VK_AMD_mixed_attachment_samples extension, the VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature are enabled, then VkPipelineMultisampleStateCreateInfo::rasterizationSamples must be the same as the current subpass color and/or depth/stencil attachments

  • VUID-vkCmdDraw-imageView-06172
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDraw-imageView-06173
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDraw-imageView-06174
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDraw-imageView-06175
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDraw-imageView-06176
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDraw-imageView-06177
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDraw-viewMask-06178
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::viewMask equal to VkRenderingInfo::viewMask

  • VUID-vkCmdDraw-colorAttachmentCount-06179
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::colorAttachmentCount equal to VkRenderingInfo::colorAttachmentCount

  • VUID-vkCmdDraw-colorAttachmentCount-06180
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a VkFormat equal to the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound graphics pipeline

  • VUID-vkCmdDraw-colorAttachmentCount-07616
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView equal to VK_NULL_HANDLE must have the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound pipeline equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDraw-None-07749
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then vkCmdSetColorWriteEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-attachmentCount-07750
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then the attachmentCount parameter of vkCmdSetColorWriteEnableEXT must be greater than or equal to the VkPipelineColorBlendStateCreateInfo::attachmentCount of the currently bound graphics pipeline

  • VUID-vkCmdDraw-None-07751
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DISCARD_RECTANGLE_EXT dynamic state enabled then vkCmdSetDiscardRectangleEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-pDepthAttachment-06181
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDraw-pDepthAttachment-07617
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pDepthAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDraw-pStencilAttachment-06182
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDraw-pStencilAttachment-07618
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pStencilAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDraw-imageView-06183
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingFragmentShadingRateAttachmentInfoKHR::imageView was not VK_NULL_HANDLE, the currently bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR

  • VUID-vkCmdDraw-imageView-06184
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingFragmentDensityMapAttachmentInfoEXT::imageView was not VK_NULL_HANDLE, the currently bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_DENSITY_MAP_ATTACHMENT_BIT_EXT

  • VUID-vkCmdDraw-colorAttachmentCount-06185
    If the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the current render pass instance was begun with vkCmdBeginRenderingKHR with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the corresponding element of the pColorAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline

  • VUID-vkCmdDraw-pDepthAttachment-06186
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDraw-pStencilAttachment-06187
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDraw-multisampledRenderToSingleSampled-07285
    If the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and the current render pass instance was begun with vkCmdBeginRenderingKHR with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline

  • VUID-vkCmdDraw-multisampledRenderToSingleSampled-07286
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDraw-multisampledRenderToSingleSampled-07287
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDraw-renderPass-06198
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline must have been created with a VkGraphicsPipelineCreateInfo::renderPass equal to VK_NULL_HANDLE

  • VUID-vkCmdDraw-primitivesGeneratedQueryWithRasterizerDiscard-06708
    If the primitivesGeneratedQueryWithRasterizerDiscard feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, rasterization discard must not be enabled

  • VUID-vkCmdDraw-primitivesGeneratedQueryWithNonZeroStreams-06709
    If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, the bound graphics pipeline must not have been created with a non-zero value in VkPipelineRasterizationStateStreamCreateInfoEXT::rasterizationStream

  • VUID-vkCmdDraw-None-07619
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_TESSELLATION_DOMAIN_ORIGIN_EXT dynamic state enabled then vkCmdSetTessellationDomainOriginEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07620
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLAMP_ENABLE_EXT dynamic state enabled then vkCmdSetDepthClampEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07621
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_POLYGON_MODE_EXT dynamic state enabled then vkCmdSetPolygonModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07622
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic state enabled then vkCmdSetRasterizationSamplesEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07623
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT dynamic state enabled then vkCmdSetSampleMaskEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07624
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT dynamic state enabled then vkCmdSetAlphaToCoverageEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07625
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_ALPHA_TO_ONE_ENABLE_EXT dynamic state enabled then vkCmdSetAlphaToOneEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07626
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LOGIC_OP_ENABLE_EXT dynamic state enabled then vkCmdSetLogicOpEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07627
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then vkCmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07628
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then vkCmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07629
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then vkCmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07630
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT dynamic state enabled then vkCmdSetRasterizationStreamEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07631
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled then vkCmdSetConservativeRasterizationModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07632
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_EXTRA_PRIMITIVE_OVERESTIMATION_SIZE_EXT dynamic state enabled then vkCmdSetExtraPrimitiveOverestimationSizeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07633
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_ENABLE_EXT dynamic state enabled then vkCmdSetDepthClipEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07634
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT dynamic state enabled then vkCmdSetSampleLocationsEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07635
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then vkCmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07636
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PROVOKING_VERTEX_MODE_EXT dynamic state enabled then vkCmdSetProvokingVertexModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07637
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic state enabled then vkCmdSetLineRasterizationModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07638
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT dynamic state enabled then vkCmdSetLineStippleEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07639
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_NEGATIVE_ONE_TO_ONE_EXT dynamic state enabled then vkCmdSetDepthClipNegativeOneToOneEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07640
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_ENABLE_NV dynamic state enabled then vkCmdSetViewportWScalingEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07641
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled then vkCmdSetViewportSwizzleNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07642
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV dynamic state enabled then vkCmdSetCoverageToColorEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07643
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_LOCATION_NV dynamic state enabled then vkCmdSetCoverageToColorLocationNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07644
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_MODE_NV dynamic state enabled then vkCmdSetCoverageModulationModeNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07645
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV dynamic state enabled then vkCmdSetCoverageModulationTableEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07646
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_NV dynamic state enabled then vkCmdSetCoverageModulationTableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07647
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SHADING_RATE_IMAGE_ENABLE_NV dynamic state enabled then vkCmdSetShadingRateImageEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07648
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_REPRESENTATIVE_FRAGMENT_TEST_ENABLE_NV dynamic state enabled then vkCmdSetRepresentativeFragmentTestEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-07649
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV dynamic state enabled then vkCmdSetCoverageReductionModeNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-pColorBlendEnables-07470
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT state enabled and the last call to vkCmdSetColorBlendEnableEXT set pColorBlendEnables for any attachment to VK_TRUE, then for those attachments in the subpass the corresponding image view’s format features must contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT

  • VUID-vkCmdDraw-rasterizationSamples-07471
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current subpass does not use any color and/or depth/stencil attachments, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must follow the rules for a zero-attachment subpass

  • VUID-vkCmdDraw-samples-07472
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the VkPipelineMultisampleStateCreateInfo::rasterizationSamples parameter used to create the bound graphics pipeline

  • VUID-vkCmdDraw-samples-07473
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state and VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the rasterizationSamples parameter in the last call to vkCmdSetRasterizationSamplesEXT

  • VUID-vkCmdDraw-multisampledRenderToSingleSampled-07475
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and none of the VK_AMD_mixed_attachment_samples extension, VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature is enabled, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must be the same as the current subpass color and/or depth/stencil attachments

  • VUID-vkCmdDraw-firstAttachment-07476
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then vkCmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendEnableEXT calls must specify an enable for all active color attachments in the current subpass

  • VUID-vkCmdDraw-firstAttachment-07477
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then vkCmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendEquationEXT calls must specify the blend equations for all active color attachments in the current subpass where blending is enabled

  • VUID-vkCmdDraw-firstAttachment-07478
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then vkCmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorWriteMaskEXT calls must specify the color write mask for all active color attachments in the current subpass

  • VUID-vkCmdDraw-firstAttachment-07479
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then vkCmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendAdvancedEXT calls must specify the advanced blend equations for all active color attachments in the current subpass where blending is enabled

  • VUID-vkCmdDraw-advancedBlendMaxColorAttachments-07480
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT and VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic states enabled and the last calls to vkCmdSetColorBlendEnableEXT and vkCmdSetColorBlendAdvancedEXT have enabled advanced blending, then the number of active color attachments in the current subpass must not exceed advancedBlendMaxColorAttachments

  • VUID-vkCmdDraw-primitivesGeneratedQueryWithNonZeroStreams-07481
    If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, and the bound graphics pipeline was created with VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT state enabled, the last call to vkCmdSetRasterizationStreamEXT must have set the rasterizationStream to zero

  • VUID-vkCmdDraw-sampleLocationsPerPixel-07482
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples member of the VkPipelineMultisampleStateCreateInfo structure the bound graphics pipeline has been created with

  • VUID-vkCmdDraw-sampleLocationsPerPixel-07483
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples parameter of the last call to vkCmdSetRasterizationSamplesEXT

  • VUID-vkCmdDraw-sampleLocationsEnable-07484
    If the bound graphics pipeline was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, and the current subpass has a depth/stencil attachment, then that attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set

  • VUID-vkCmdDraw-sampleLocationsEnable-07485
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.width in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::sampleLocationGridSize.width as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples

  • VUID-vkCmdDraw-sampleLocationsEnable-07486
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.height in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::sampleLocationGridSize.height as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples

  • VUID-vkCmdDraw-sampleLocationsEnable-07487
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, the fragment shader code must not statically use the extended instruction InterpolateAtSample

  • VUID-vkCmdDraw-coverageModulationTableEnable-07488
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV state enabled and the last call to vkCmdSetCoverageModulationTableEnableNV set coverageModulationTableEnable to VK_TRUE, then the coverageModulationTableCount parameter in the last call to vkCmdSetCoverageModulationTableNV must equal the current rasterizationSamples divided by the number of color samples in the current subpass

  • VUID-vkCmdDraw-rasterizationSamples-07489
    If the VK_NV_framebuffer_mixed_samples extension is enabled, and if current subpass has a depth/stencil attachment and depth test, stencil test, or depth bounds test are enabled in the currently bound pipeline state, then the current rasterizationSamples must be the same as the sample count of the depth/stencil attachment

  • VUID-vkCmdDraw-coverageToColorEnable-07490
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV state enabled and the last call to vkCmdSetCoverageToColorEnableNV set the coverageToColorEnable to VK_TRUE, then the current subpass must have a color attachment at the location selected by the last call to vkCmdSetCoverageToColorLocationNV coverageToColorLocation, with a VkFormat of VK_FORMAT_R8_UINT, VK_FORMAT_R8_SINT, VK_FORMAT_R16_UINT, VK_FORMAT_R16_SINT, VK_FORMAT_R32_UINT, or VK_FORMAT_R32_SINT

  • VUID-vkCmdDraw-coverageReductionMode-07491
    If this VK_NV_coverage_reduction_mode extension is enabled, the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV and VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, the current coverage reduction mode coverageReductionMode, then the current rasterizationSamples, and the sample counts for the color and depth/stencil attachments (if the subpass has them) must be a valid combination returned by vkGetPhysicalDeviceSupportedFramebufferMixedSamplesCombinationsNV

  • VUID-vkCmdDraw-viewportCount-07492
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-viewportCount-07493
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportSwizzleNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDraw-rasterizationSamples-07494
    If the VK_NV_framebuffer_mixed_samples extension is enabled, and if the current subpass has any color attachments and rasterizationSamples of the last call to vkCmdSetRasterizationSamplesEXT is greater than the number of color samples, then the pipeline sampleShadingEnable must be VK_FALSE

  • VUID-vkCmdDraw-stippledLineEnable-07495
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT, then the stippledRectangularLines feature must be enabled

  • VUID-vkCmdDraw-stippledLineEnable-07496
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT, then the stippledBresenhamLines feature must be enabled

  • VUID-vkCmdDraw-stippledLineEnable-07497
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH_EXT, then the stippledSmoothLines feature must be enabled

  • VUID-vkCmdDraw-stippledLineEnable-07498
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_DEFAULT_EXT, then the stippledRectangularLines feature must be enabled and VkPhysicalDeviceLimits::strictLines must be VK_TRUE

  • VUID-vkCmdDraw-conservativePointAndLineRasterization-07499
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled, conservativePointAndLineRasterization is not supported, and the effective primitive topology output by the last pre-rasterization shader stage is a line or point, then the conservativeRasterizationMode set by the last call to vkCmdSetConservativeRasterizationModeEXT must be VK_CONSERVATIVE_RASTERIZATION_MODE_DISABLED_EXT

  • VUID-vkCmdDraw-stage-07073
    If the currently bound pipeline was created with the VkPipelineShaderStageCreateInfo::stage member of an element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT or VK_SHADER_STAGE_GEOMETRY_BIT, then Mesh Shader Queries must not be active

  • VUID-vkCmdDraw-commandBuffer-02712
    If commandBuffer is a protected command buffer and protectedNoFault is not supported, any resource written to by the VkPipeline object bound to the pipeline bind point used by this command must not be an unprotected resource

  • VUID-vkCmdDraw-commandBuffer-02713
    If commandBuffer is a protected command buffer and protectedNoFault is not supported, pipeline stages other than the framebuffer-space and compute stages in the VkPipeline object bound to the pipeline bind point used by this command must not write to any resource

  • VUID-vkCmdDraw-commandBuffer-04617
    If any of the shader stages of the VkPipeline bound to the pipeline bind point used by this command uses the RayQueryKHR capability, then commandBuffer must not be a protected command buffer

  • VUID-vkCmdDraw-None-04007
    All vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must have either valid or VK_NULL_HANDLE buffers bound

  • VUID-vkCmdDraw-None-04008
    If the nullDescriptor feature is not enabled, all vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must not be VK_NULL_HANDLE

  • VUID-vkCmdDraw-None-02721
    For a given vertex buffer binding, any attribute data fetched must be entirely contained within the corresponding vertex buffer binding, as described in Vertex Input Description

  • VUID-vkCmdDraw-dynamicPrimitiveTopologyUnrestricted-07500
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PRIMITIVE_TOPOLOGY_EXT dynamic state enabled and the dynamicPrimitiveTopologyUnrestricted is VK_FALSE, then the primitiveTopology parameter in the last call to vkCmdSetPrimitiveTopologyEXT must be of the same topology class as the pipeline VkPipelineInputAssemblyStateCreateInfo::topology state

  • VUID-vkCmdDraw-None-04912
    If the bound graphics pipeline was created with both the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT and VK_DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic states enabled, then vkCmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command

  • VUID-vkCmdDraw-pStrides-04913
    If the bound graphics pipeline was created with the VK_DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic state enabled, but not the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled, then vkCmdBindVertexBuffers2EXT must have been called in the current command buffer prior to this draw command, and the pStrides parameter of vkCmdBindVertexBuffers2EXT must not be NULL

  • VUID-vkCmdDraw-None-04914
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled, then vkCmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command

  • VUID-vkCmdDraw-None-04875
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PATCH_CONTROL_POINTS_EXT dynamic state enabled then vkCmdSetPatchControlPointsEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-None-04879
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE dynamic state enabled then vkCmdSetPrimitiveRestartEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDraw-stage-06481
    The bound graphics pipeline must not have been created with the VkPipelineShaderStageCreateInfo::stage member of an element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_TASK_BIT_EXT or VK_SHADER_STAGE_MESH_BIT_EXT

Valid Usage (Implicit)
  • VUID-vkCmdDraw-commandBuffer-parameter
    commandBuffer must be a valid VkCommandBuffer handle

  • VUID-vkCmdDraw-commandBuffer-recording
    commandBuffer must be in the recording state

  • VUID-vkCmdDraw-commandBuffer-cmdpool
    The VkCommandPool that commandBuffer was allocated from must support graphics operations

  • VUID-vkCmdDraw-renderpass
    This command must only be called inside of a render pass instance

  • VUID-vkCmdDraw-videocoding
    This command must only be called outside of a video coding scope

Host Synchronization
  • Host access to commandBuffer must be externally synchronized

  • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties
Command Buffer Levels Render Pass Scope Video Coding Scope Supported Queue Types Command Type

Primary
Secondary

Inside

Outside

Graphics

Action

To record an indexed draw, call:

// Provided by VK_VERSION_1_0
void vkCmdDrawIndexed(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    indexCount,
    uint32_t                                    instanceCount,
    uint32_t                                    firstIndex,
    int32_t                                     vertexOffset,
    uint32_t                                    firstInstance);
  • commandBuffer is the command buffer into which the command is recorded.

  • indexCount is the number of vertices to draw.

  • instanceCount is the number of instances to draw.

  • firstIndex is the base index within the index buffer.

  • vertexOffset is the value added to the vertex index before indexing into the vertex buffer.

  • firstInstance is the instance ID of the first instance to draw.

When the command is executed, primitives are assembled using the current primitive topology and indexCount vertices whose indices are retrieved from the index buffer. The index buffer is treated as an array of tightly packed unsigned integers of size defined by the vkCmdBindIndexBuffer::indexType parameter with which the buffer was bound.

The first vertex index is at an offset of firstIndex × indexSize + offset within the bound index buffer, where offset is the offset specified by vkCmdBindIndexBuffer and indexSize is the byte size of the type specified by indexType. Subsequent index values are retrieved from consecutive locations in the index buffer. Indices are first compared to the primitive restart value, then zero extended to 32 bits (if the indexType is VK_INDEX_TYPE_UINT8_EXT or VK_INDEX_TYPE_UINT16) and have vertexOffset added to them, before being supplied as the vertexIndex value.

The primitives are drawn instanceCount times with instanceIndex starting with firstInstance and increasing sequentially for each instance. The assembled primitives execute the bound graphics pipeline.

Valid Usage
  • VUID-vkCmdDrawIndexed-magFilter-04553
    If a VkSampler created with magFilter or minFilter equal to VK_FILTER_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDrawIndexed-mipmapMode-04770
    If a VkSampler created with mipmapMode equal to VK_SAMPLER_MIPMAP_MODE_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDrawIndexed-None-06479
    If a VkImageView is sampled with depth comparison, the image view’s format features must contain VK_FORMAT_FEATURE_2_SAMPLED_IMAGE_DEPTH_COMPARISON_BIT

  • VUID-vkCmdDrawIndexed-None-02691
    If a VkImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT

  • VUID-vkCmdDrawIndexed-None-02692
    If a VkImageView is sampled with VK_FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT

  • VUID-vkCmdDrawIndexed-filterCubic-02694
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT as a result of this command must have a VkImageViewType and format that supports cubic filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDrawIndexed-filterCubicMinmax-02695
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT with a reduction mode of either VK_SAMPLER_REDUCTION_MODE_MIN or VK_SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a VkImageViewType and format that supports cubic filtering together with minmax filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDrawIndexed-flags-02696
    Any VkImage created with a VkImageCreateInfo::flags containing VK_IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a VkSamplerAddressMode of VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE

  • VUID-vkCmdDrawIndexed-OpTypeImage-07027
    For any VkImageView being written as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawIndexed-OpTypeImage-07028
    For any VkImageView being read as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawIndexed-OpTypeImage-07029
    For any VkBufferView being written as a storage texel buffer where the image format field of the OpTypeImage is Unknown, the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawIndexed-OpTypeImage-07030
    Any VkBufferView being read as a storage texel buffer where the image format field of the OpTypeImage is Unknown then the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawIndexed-None-02697
    For each set n that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a VkPipelineLayout that is compatible for set n, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDrawIndexed-maintenance4-06425
    If the maintenance4 feature is not enabled, then for each push constant that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a VkPipelineLayout that is compatible for push constants, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDrawIndexed-None-08114
    Descriptors in each bound descriptor set, specified via vkCmdBindDescriptorSets, must be valid if they are statically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was not created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawIndexed-None-08115
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdBindDescriptorSets, the bound VkPipeline must have been created without VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawIndexed-None-08116
    Descriptors in bound descriptor buffers, specified via vkCmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawIndexed-None-08117
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdSetDescriptorBufferOffsetsEXT, the bound VkPipeline must have been created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawIndexed-None-08119
    If a descriptor is dynamically used with a VkPipeline created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident

  • VUID-vkCmdDrawIndexed-None-02700
    A valid pipeline must be bound to the pipeline bind point used by this command

  • VUID-vkCmdDrawIndexed-commandBuffer-02701
    If the VkPipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set or inherited (if the VK_NV_inherited_viewport_scissor extension is enabled) for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic

  • VUID-vkCmdDrawIndexed-None-02859
    There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the VkPipeline object bound to the pipeline bind point used by this command, since that pipeline was bound

  • VUID-vkCmdDrawIndexed-None-02702
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used to sample from any VkImage with a VkImageView of the type VK_IMAGE_VIEW_TYPE_3D, VK_IMAGE_VIEW_TYPE_CUBE, VK_IMAGE_VIEW_TYPE_1D_ARRAY, VK_IMAGE_VIEW_TYPE_2D_ARRAY or VK_IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage

  • VUID-vkCmdDrawIndexed-None-02703
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage

  • VUID-vkCmdDrawIndexed-None-02704
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage

  • VUID-vkCmdDrawIndexed-uniformBuffers-06935
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for uniformBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDrawIndexed-storageBuffers-06936
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a storage buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for storageBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDrawIndexed-commandBuffer-02707
    If commandBuffer is an unprotected command buffer and protectedNoFault is not supported, any resource accessed by the VkPipeline object bound to the pipeline bind point used by this command must not be a protected resource

  • VUID-vkCmdDrawIndexed-None-06550
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must only be used with OpImageSample* or OpImageSparseSample* instructions

  • VUID-vkCmdDrawIndexed-ConstOffset-06551
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must not use the ConstOffset and Offset operands

  • VUID-vkCmdDrawIndexed-viewType-07752
    If a VkImageView is accessed as a result of this command, then the image view’s viewType must match the Dim operand of the OpTypeImage as described in Instruction/Sampler/Image View Validation

  • VUID-vkCmdDrawIndexed-format-07753
    If a VkImageView is accessed as a result of this command, then the image view’s format must match the numeric format from the Sampled Type operand of the OpTypeImage as described in the SPIR-V Sampled Type column of the Interpretation of Numeric Format table

  • VUID-vkCmdDrawIndexed-None-04115
    If a VkImageView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the image view’s format

  • VUID-vkCmdDrawIndexed-OpImageWrite-04469
    If a VkBufferView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the buffer view’s format

  • VUID-vkCmdDrawIndexed-SampledType-04470
    If a VkImageView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDrawIndexed-SampledType-04471
    If a VkImageView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDrawIndexed-SampledType-04472
    If a VkBufferView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDrawIndexed-SampledType-04473
    If a VkBufferView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDrawIndexed-sparseImageInt64Atomics-04474
    If the sparseImageInt64Atomics feature is not enabled, VkImage objects created with the VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDrawIndexed-sparseImageInt64Atomics-04475
    If the sparseImageInt64Atomics feature is not enabled, VkBuffer objects created with the VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDrawIndexed-OpImageWeightedSampleQCOM-06971
    If OpImageWeightedSampleQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_SAMPLED_IMAGE_BIT_QCOM

  • VUID-vkCmdDrawIndexed-OpImageWeightedSampleQCOM-06972
    If OpImageWeightedSampleQCOM uses a VkImageView as a sample weight image as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_IMAGE_BIT_QCOM

  • VUID-vkCmdDrawIndexed-OpImageBoxFilterQCOM-06973
    If OpImageBoxFilterQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BOX_FILTER_SAMPLED_BIT_QCOM

  • VUID-vkCmdDrawIndexed-OpImageBlockMatchSSDQCOM-06974
    If OpImageBlockMatchSSDQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDrawIndexed-OpImageBlockMatchSADQCOM-06975
    If OpImageBlockMatchSADQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDrawIndexed-OpImageBlockMatchSADQCOM-06976
    If OpImageBlockMatchSADQCOM or OpImageBlockMatchSSDQCOM is used to read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation

  • VUID-vkCmdDrawIndexed-OpImageWeightedSampleQCOM-06977
    If OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDrawIndexed-OpImageWeightedSampleQCOM-06978
    If any command other than OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must not have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDrawIndexed-None-07288
    Any shader invocation executed by this command must terminate

  • VUID-vkCmdDrawIndexed-renderPass-02684
    The current render pass must be compatible with the renderPass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDrawIndexed-subpass-02685
    The subpass index of the current render pass must be equal to the subpass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDrawIndexed-None-07748
    If any shader statically accesses an input attachment, a valid descriptor must be bound to the pipeline via a descriptor set

  • VUID-vkCmdDrawIndexed-OpTypeImage-07468
    If any shader executed by this pipeline accesses an OpTypeImage variable with a Dim operand of SubpassData, it must be decorated with an InputAttachmentIndex that corresponds to a valid input attachment in the current subpass

  • VUID-vkCmdDrawIndexed-None-07469
    Input attachment views accessed in a subpass must be created with the same VkFormat as the corresponding subpass definition, and be created with a VkImageView that is compatible with the attachment referenced by the subpass' pInputAttachments[InputAttachmentIndex] in the currently bound VkFramebuffer as specified by Fragment Input Attachment Compatibility

  • VUID-vkCmdDrawIndexed-None-06537
    Memory backing image subresources used as attachments in the current render pass must not be written in any way other than as an attachment by this command

  • VUID-vkCmdDrawIndexed-None-06538
    If any recorded command in the current subpass will write to an image subresource as an attachment, this command must not read from the memory backing that image subresource in any other way than as an attachment

  • VUID-vkCmdDrawIndexed-None-06539
    If any recorded command in the current subpass will read from an image subresource used as an attachment in any way other than as an attachment, this command must not write to that image subresource as an attachment

  • VUID-vkCmdDrawIndexed-None-06886
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the depth aspect, depth writes must be disabled

  • VUID-vkCmdDrawIndexed-None-06887
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the stencil aspect, both front and back writeMask are not zero, and stencil test is enabled, all stencil ops must be VK_STENCIL_OP_KEEP

  • VUID-vkCmdDrawIndexed-maxMultiviewInstanceIndex-02688
    If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to VkPhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex

  • VUID-vkCmdDrawIndexed-sampleLocationsEnable-02689
    If the bound graphics pipeline was created with VkPipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to VK_TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set

  • VUID-vkCmdDrawIndexed-None-06666
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT dynamic state enabled then vkCmdSetSampleLocationsEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-viewportCount-03417
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, then vkCmdSetViewportWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must match the VkPipelineViewportStateCreateInfo::scissorCount of the pipeline

  • VUID-vkCmdDrawIndexed-scissorCount-03418
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, then vkCmdSetScissorWithCountEXT must have been called in the current command buffer prior to this drawing command, and the scissorCount parameter of vkCmdSetScissorWithCount must match the VkPipelineViewportStateCreateInfo::viewportCount of the pipeline

  • VUID-vkCmdDrawIndexed-viewportCount-03419
    If the bound graphics pipeline state was created with both the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic states enabled then both vkCmdSetViewportWithCountEXT and vkCmdSetScissorWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must match the scissorCount parameter of vkCmdSetScissorWithCount

  • VUID-vkCmdDrawIndexed-viewportCount-04137
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportWScalingStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-viewportCount-04138
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportWScalingNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-viewportCount-04139
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportShadingRateImageStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-viewportCount-04140
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportShadingRatePaletteNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-VkPipelineVieportCreateInfo-04141
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportSwizzleStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-VkPipelineVieportCreateInfo-04142
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportExclusiveScissorStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportExclusiveScissorStateCreateInfoNV::exclusiveScissorCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-None-04876
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZER_DISCARD_ENABLE dynamic state enabled then vkCmdSetRasterizerDiscardEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-04877
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_BIAS_ENABLE dynamic state enabled then vkCmdSetDepthBiasEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-logicOp-04878
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LOGIC_OP_EXT dynamic state enabled then vkCmdSetLogicOpEXT must have been called in the current command buffer prior to this drawing command and the logicOp must be a valid VkLogicOp value

  • VUID-vkCmdDrawIndexed-primitiveFragmentShadingRateWithMultipleViewports-04552
    If the primitiveFragmentShadingRateWithMultipleViewports limit is not supported, the bound graphics pipeline was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, and any of the shader stages of the bound graphics pipeline write to the PrimitiveShadingRateKHR built-in, then vkCmdSetViewportWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must be 1

  • VUID-vkCmdDrawIndexed-blendEnable-04727
    If rasterization is not disabled in the bound graphics pipeline, then for each color attachment in the subpass, if the corresponding image view’s format features do not contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT, then the blendEnable member of the corresponding element of the pAttachments member of pColorBlendState must be VK_FALSE

  • VUID-vkCmdDrawIndexed-multisampledRenderToSingleSampled-07284
    If rasterization is not disabled in the bound graphics pipeline, and none of the VK_AMD_mixed_attachment_samples extension, the VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature are enabled, then VkPipelineMultisampleStateCreateInfo::rasterizationSamples must be the same as the current subpass color and/or depth/stencil attachments

  • VUID-vkCmdDrawIndexed-imageView-06172
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDrawIndexed-imageView-06173
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDrawIndexed-imageView-06174
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDrawIndexed-imageView-06175
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDrawIndexed-imageView-06176
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDrawIndexed-imageView-06177
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDrawIndexed-viewMask-06178
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::viewMask equal to VkRenderingInfo::viewMask

  • VUID-vkCmdDrawIndexed-colorAttachmentCount-06179
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::colorAttachmentCount equal to VkRenderingInfo::colorAttachmentCount

  • VUID-vkCmdDrawIndexed-colorAttachmentCount-06180
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a VkFormat equal to the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound graphics pipeline

  • VUID-vkCmdDrawIndexed-colorAttachmentCount-07616
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView equal to VK_NULL_HANDLE must have the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound pipeline equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDrawIndexed-None-07749
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then vkCmdSetColorWriteEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-attachmentCount-07750
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then the attachmentCount parameter of vkCmdSetColorWriteEnableEXT must be greater than or equal to the VkPipelineColorBlendStateCreateInfo::attachmentCount of the currently bound graphics pipeline

  • VUID-vkCmdDrawIndexed-None-07751
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DISCARD_RECTANGLE_EXT dynamic state enabled then vkCmdSetDiscardRectangleEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-pDepthAttachment-06181
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDrawIndexed-pDepthAttachment-07617
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pDepthAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDrawIndexed-pStencilAttachment-06182
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDrawIndexed-pStencilAttachment-07618
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pStencilAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDrawIndexed-imageView-06183
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingFragmentShadingRateAttachmentInfoKHR::imageView was not VK_NULL_HANDLE, the currently bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR

  • VUID-vkCmdDrawIndexed-imageView-06184
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingFragmentDensityMapAttachmentInfoEXT::imageView was not VK_NULL_HANDLE, the currently bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_DENSITY_MAP_ATTACHMENT_BIT_EXT

  • VUID-vkCmdDrawIndexed-colorAttachmentCount-06185
    If the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the current render pass instance was begun with vkCmdBeginRenderingKHR with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the corresponding element of the pColorAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline

  • VUID-vkCmdDrawIndexed-pDepthAttachment-06186
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDrawIndexed-pStencilAttachment-06187
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDrawIndexed-multisampledRenderToSingleSampled-07285
    If the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and the current render pass instance was begun with vkCmdBeginRenderingKHR with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline

  • VUID-vkCmdDrawIndexed-multisampledRenderToSingleSampled-07286
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDrawIndexed-multisampledRenderToSingleSampled-07287
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDrawIndexed-renderPass-06198
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline must have been created with a VkGraphicsPipelineCreateInfo::renderPass equal to VK_NULL_HANDLE

  • VUID-vkCmdDrawIndexed-primitivesGeneratedQueryWithRasterizerDiscard-06708
    If the primitivesGeneratedQueryWithRasterizerDiscard feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, rasterization discard must not be enabled

  • VUID-vkCmdDrawIndexed-primitivesGeneratedQueryWithNonZeroStreams-06709
    If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, the bound graphics pipeline must not have been created with a non-zero value in VkPipelineRasterizationStateStreamCreateInfoEXT::rasterizationStream

  • VUID-vkCmdDrawIndexed-None-07619
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_TESSELLATION_DOMAIN_ORIGIN_EXT dynamic state enabled then vkCmdSetTessellationDomainOriginEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07620
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLAMP_ENABLE_EXT dynamic state enabled then vkCmdSetDepthClampEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07621
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_POLYGON_MODE_EXT dynamic state enabled then vkCmdSetPolygonModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07622
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic state enabled then vkCmdSetRasterizationSamplesEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07623
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT dynamic state enabled then vkCmdSetSampleMaskEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07624
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT dynamic state enabled then vkCmdSetAlphaToCoverageEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07625
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_ALPHA_TO_ONE_ENABLE_EXT dynamic state enabled then vkCmdSetAlphaToOneEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07626
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LOGIC_OP_ENABLE_EXT dynamic state enabled then vkCmdSetLogicOpEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07627
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then vkCmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07628
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then vkCmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07629
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then vkCmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07630
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT dynamic state enabled then vkCmdSetRasterizationStreamEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07631
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled then vkCmdSetConservativeRasterizationModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07632
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_EXTRA_PRIMITIVE_OVERESTIMATION_SIZE_EXT dynamic state enabled then vkCmdSetExtraPrimitiveOverestimationSizeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07633
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_ENABLE_EXT dynamic state enabled then vkCmdSetDepthClipEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07634
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT dynamic state enabled then vkCmdSetSampleLocationsEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07635
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then vkCmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07636
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PROVOKING_VERTEX_MODE_EXT dynamic state enabled then vkCmdSetProvokingVertexModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07637
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic state enabled then vkCmdSetLineRasterizationModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07638
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT dynamic state enabled then vkCmdSetLineStippleEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07639
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_NEGATIVE_ONE_TO_ONE_EXT dynamic state enabled then vkCmdSetDepthClipNegativeOneToOneEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07640
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_ENABLE_NV dynamic state enabled then vkCmdSetViewportWScalingEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07641
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled then vkCmdSetViewportSwizzleNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07642
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV dynamic state enabled then vkCmdSetCoverageToColorEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07643
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_LOCATION_NV dynamic state enabled then vkCmdSetCoverageToColorLocationNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07644
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_MODE_NV dynamic state enabled then vkCmdSetCoverageModulationModeNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07645
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV dynamic state enabled then vkCmdSetCoverageModulationTableEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07646
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_NV dynamic state enabled then vkCmdSetCoverageModulationTableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07647
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SHADING_RATE_IMAGE_ENABLE_NV dynamic state enabled then vkCmdSetShadingRateImageEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07648
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_REPRESENTATIVE_FRAGMENT_TEST_ENABLE_NV dynamic state enabled then vkCmdSetRepresentativeFragmentTestEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-07649
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV dynamic state enabled then vkCmdSetCoverageReductionModeNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-pColorBlendEnables-07470
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT state enabled and the last call to vkCmdSetColorBlendEnableEXT set pColorBlendEnables for any attachment to VK_TRUE, then for those attachments in the subpass the corresponding image view’s format features must contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT

  • VUID-vkCmdDrawIndexed-rasterizationSamples-07471
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current subpass does not use any color and/or depth/stencil attachments, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must follow the rules for a zero-attachment subpass

  • VUID-vkCmdDrawIndexed-samples-07472
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the VkPipelineMultisampleStateCreateInfo::rasterizationSamples parameter used to create the bound graphics pipeline

  • VUID-vkCmdDrawIndexed-samples-07473
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state and VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the rasterizationSamples parameter in the last call to vkCmdSetRasterizationSamplesEXT

  • VUID-vkCmdDrawIndexed-multisampledRenderToSingleSampled-07475
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and none of the VK_AMD_mixed_attachment_samples extension, VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature is enabled, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must be the same as the current subpass color and/or depth/stencil attachments

  • VUID-vkCmdDrawIndexed-firstAttachment-07476
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then vkCmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendEnableEXT calls must specify an enable for all active color attachments in the current subpass

  • VUID-vkCmdDrawIndexed-firstAttachment-07477
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then vkCmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendEquationEXT calls must specify the blend equations for all active color attachments in the current subpass where blending is enabled

  • VUID-vkCmdDrawIndexed-firstAttachment-07478
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then vkCmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorWriteMaskEXT calls must specify the color write mask for all active color attachments in the current subpass

  • VUID-vkCmdDrawIndexed-firstAttachment-07479
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then vkCmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendAdvancedEXT calls must specify the advanced blend equations for all active color attachments in the current subpass where blending is enabled

  • VUID-vkCmdDrawIndexed-advancedBlendMaxColorAttachments-07480
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT and VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic states enabled and the last calls to vkCmdSetColorBlendEnableEXT and vkCmdSetColorBlendAdvancedEXT have enabled advanced blending, then the number of active color attachments in the current subpass must not exceed advancedBlendMaxColorAttachments

  • VUID-vkCmdDrawIndexed-primitivesGeneratedQueryWithNonZeroStreams-07481
    If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, and the bound graphics pipeline was created with VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT state enabled, the last call to vkCmdSetRasterizationStreamEXT must have set the rasterizationStream to zero

  • VUID-vkCmdDrawIndexed-sampleLocationsPerPixel-07482
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples member of the VkPipelineMultisampleStateCreateInfo structure the bound graphics pipeline has been created with

  • VUID-vkCmdDrawIndexed-sampleLocationsPerPixel-07483
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples parameter of the last call to vkCmdSetRasterizationSamplesEXT

  • VUID-vkCmdDrawIndexed-sampleLocationsEnable-07484
    If the bound graphics pipeline was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, and the current subpass has a depth/stencil attachment, then that attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set

  • VUID-vkCmdDrawIndexed-sampleLocationsEnable-07485
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.width in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::sampleLocationGridSize.width as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples

  • VUID-vkCmdDrawIndexed-sampleLocationsEnable-07486
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.height in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::sampleLocationGridSize.height as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples

  • VUID-vkCmdDrawIndexed-sampleLocationsEnable-07487
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, the fragment shader code must not statically use the extended instruction InterpolateAtSample

  • VUID-vkCmdDrawIndexed-coverageModulationTableEnable-07488
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV state enabled and the last call to vkCmdSetCoverageModulationTableEnableNV set coverageModulationTableEnable to VK_TRUE, then the coverageModulationTableCount parameter in the last call to vkCmdSetCoverageModulationTableNV must equal the current rasterizationSamples divided by the number of color samples in the current subpass

  • VUID-vkCmdDrawIndexed-rasterizationSamples-07489
    If the VK_NV_framebuffer_mixed_samples extension is enabled, and if current subpass has a depth/stencil attachment and depth test, stencil test, or depth bounds test are enabled in the currently bound pipeline state, then the current rasterizationSamples must be the same as the sample count of the depth/stencil attachment

  • VUID-vkCmdDrawIndexed-coverageToColorEnable-07490
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV state enabled and the last call to vkCmdSetCoverageToColorEnableNV set the coverageToColorEnable to VK_TRUE, then the current subpass must have a color attachment at the location selected by the last call to vkCmdSetCoverageToColorLocationNV coverageToColorLocation, with a VkFormat of VK_FORMAT_R8_UINT, VK_FORMAT_R8_SINT, VK_FORMAT_R16_UINT, VK_FORMAT_R16_SINT, VK_FORMAT_R32_UINT, or VK_FORMAT_R32_SINT

  • VUID-vkCmdDrawIndexed-coverageReductionMode-07491
    If this VK_NV_coverage_reduction_mode extension is enabled, the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV and VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, the current coverage reduction mode coverageReductionMode, then the current rasterizationSamples, and the sample counts for the color and depth/stencil attachments (if the subpass has them) must be a valid combination returned by vkGetPhysicalDeviceSupportedFramebufferMixedSamplesCombinationsNV

  • VUID-vkCmdDrawIndexed-viewportCount-07492
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-viewportCount-07493
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportSwizzleNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawIndexed-rasterizationSamples-07494
    If the VK_NV_framebuffer_mixed_samples extension is enabled, and if the current subpass has any color attachments and rasterizationSamples of the last call to vkCmdSetRasterizationSamplesEXT is greater than the number of color samples, then the pipeline sampleShadingEnable must be VK_FALSE

  • VUID-vkCmdDrawIndexed-stippledLineEnable-07495
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT, then the stippledRectangularLines feature must be enabled

  • VUID-vkCmdDrawIndexed-stippledLineEnable-07496
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT, then the stippledBresenhamLines feature must be enabled

  • VUID-vkCmdDrawIndexed-stippledLineEnable-07497
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH_EXT, then the stippledSmoothLines feature must be enabled

  • VUID-vkCmdDrawIndexed-stippledLineEnable-07498
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_DEFAULT_EXT, then the stippledRectangularLines feature must be enabled and VkPhysicalDeviceLimits::strictLines must be VK_TRUE

  • VUID-vkCmdDrawIndexed-conservativePointAndLineRasterization-07499
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled, conservativePointAndLineRasterization is not supported, and the effective primitive topology output by the last pre-rasterization shader stage is a line or point, then the conservativeRasterizationMode set by the last call to vkCmdSetConservativeRasterizationModeEXT must be VK_CONSERVATIVE_RASTERIZATION_MODE_DISABLED_EXT

  • VUID-vkCmdDrawIndexed-stage-07073
    If the currently bound pipeline was created with the VkPipelineShaderStageCreateInfo::stage member of an element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT or VK_SHADER_STAGE_GEOMETRY_BIT, then Mesh Shader Queries must not be active

  • VUID-vkCmdDrawIndexed-commandBuffer-02712
    If commandBuffer is a protected command buffer and protectedNoFault is not supported, any resource written to by the VkPipeline object bound to the pipeline bind point used by this command must not be an unprotected resource

  • VUID-vkCmdDrawIndexed-commandBuffer-02713
    If commandBuffer is a protected command buffer and protectedNoFault is not supported, pipeline stages other than the framebuffer-space and compute stages in the VkPipeline object bound to the pipeline bind point used by this command must not write to any resource

  • VUID-vkCmdDrawIndexed-commandBuffer-04617
    If any of the shader stages of the VkPipeline bound to the pipeline bind point used by this command uses the RayQueryKHR capability, then commandBuffer must not be a protected command buffer

  • VUID-vkCmdDrawIndexed-None-04007
    All vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must have either valid or VK_NULL_HANDLE buffers bound

  • VUID-vkCmdDrawIndexed-None-04008
    If the nullDescriptor feature is not enabled, all vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must not be VK_NULL_HANDLE

  • VUID-vkCmdDrawIndexed-None-02721
    For a given vertex buffer binding, any attribute data fetched must be entirely contained within the corresponding vertex buffer binding, as described in Vertex Input Description

  • VUID-vkCmdDrawIndexed-dynamicPrimitiveTopologyUnrestricted-07500
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PRIMITIVE_TOPOLOGY_EXT dynamic state enabled and the dynamicPrimitiveTopologyUnrestricted is VK_FALSE, then the primitiveTopology parameter in the last call to vkCmdSetPrimitiveTopologyEXT must be of the same topology class as the pipeline VkPipelineInputAssemblyStateCreateInfo::topology state

  • VUID-vkCmdDrawIndexed-None-04912
    If the bound graphics pipeline was created with both the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT and VK_DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic states enabled, then vkCmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command

  • VUID-vkCmdDrawIndexed-pStrides-04913
    If the bound graphics pipeline was created with the VK_DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic state enabled, but not the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled, then vkCmdBindVertexBuffers2EXT must have been called in the current command buffer prior to this draw command, and the pStrides parameter of vkCmdBindVertexBuffers2EXT must not be NULL

  • VUID-vkCmdDrawIndexed-None-04914
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled, then vkCmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command

  • VUID-vkCmdDrawIndexed-None-04875
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PATCH_CONTROL_POINTS_EXT dynamic state enabled then vkCmdSetPatchControlPointsEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-None-04879
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE dynamic state enabled then vkCmdSetPrimitiveRestartEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawIndexed-stage-06481
    The bound graphics pipeline must not have been created with the VkPipelineShaderStageCreateInfo::stage member of an element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_TASK_BIT_EXT or VK_SHADER_STAGE_MESH_BIT_EXT

  • VUID-vkCmdDrawIndexed-None-07312
    An index buffer must be bound

  • VUID-vkCmdDrawIndexed-firstIndex-04932
    (indexSize × (firstIndex + indexCount) + offset) must be less than or equal to the size of the bound index buffer, with indexSize being based on the type specified by indexType, where the index buffer, indexType, and offset are specified via vkCmdBindIndexBuffer

Valid Usage (Implicit)
  • VUID-vkCmdDrawIndexed-commandBuffer-parameter
    commandBuffer must be a valid VkCommandBuffer handle

  • VUID-vkCmdDrawIndexed-commandBuffer-recording
    commandBuffer must be in the recording state

  • VUID-vkCmdDrawIndexed-commandBuffer-cmdpool
    The VkCommandPool that commandBuffer was allocated from must support graphics operations

  • VUID-vkCmdDrawIndexed-renderpass
    This command must only be called inside of a render pass instance

  • VUID-vkCmdDrawIndexed-videocoding
    This command must only be called outside of a video coding scope

Host Synchronization
  • Host access to commandBuffer must be externally synchronized

  • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties
Command Buffer Levels Render Pass Scope Video Coding Scope Supported Queue Types Command Type

Primary
Secondary

Inside

Outside

Graphics

Action

To record an ordered sequence of drawing operations which have no state changes between them, call:

// Provided by VK_EXT_multi_draw
void vkCmdDrawMultiEXT(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    drawCount,
    const VkMultiDrawInfoEXT*                   pVertexInfo,
    uint32_t                                    instanceCount,
    uint32_t                                    firstInstance,
    uint32_t                                    stride);
  • commandBuffer is the command buffer into which the command is recorded.

  • drawCount is the number of draws to execute, and can be zero.

  • pVertexInfo is a pointer to an array of VkMultiDrawInfoEXT with vertex information to be drawn.

  • instanceCount is the number of instances to draw.

  • firstInstance is the instance ID of the first instance to draw.

  • stride is the byte stride between consecutive elements of pVertexInfo.

drawCount draws are executed with parameters taken from pVertexInfo. The number of draw commands recorded is drawCount, with each command reading, sequentially, a firstVertex and a vertexCount from pVertexInfo.

Valid Usage
  • VUID-vkCmdDrawMultiEXT-magFilter-04553
    If a VkSampler created with magFilter or minFilter equal to VK_FILTER_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDrawMultiEXT-mipmapMode-04770
    If a VkSampler created with mipmapMode equal to VK_SAMPLER_MIPMAP_MODE_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDrawMultiEXT-None-06479
    If a VkImageView is sampled with depth comparison, the image view’s format features must contain VK_FORMAT_FEATURE_2_SAMPLED_IMAGE_DEPTH_COMPARISON_BIT

  • VUID-vkCmdDrawMultiEXT-None-02691
    If a VkImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT

  • VUID-vkCmdDrawMultiEXT-None-02692
    If a VkImageView is sampled with VK_FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT

  • VUID-vkCmdDrawMultiEXT-filterCubic-02694
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT as a result of this command must have a VkImageViewType and format that supports cubic filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDrawMultiEXT-filterCubicMinmax-02695
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT with a reduction mode of either VK_SAMPLER_REDUCTION_MODE_MIN or VK_SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a VkImageViewType and format that supports cubic filtering together with minmax filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDrawMultiEXT-flags-02696
    Any VkImage created with a VkImageCreateInfo::flags containing VK_IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a VkSamplerAddressMode of VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE

  • VUID-vkCmdDrawMultiEXT-OpTypeImage-07027
    For any VkImageView being written as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiEXT-OpTypeImage-07028
    For any VkImageView being read as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiEXT-OpTypeImage-07029
    For any VkBufferView being written as a storage texel buffer where the image format field of the OpTypeImage is Unknown, the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiEXT-OpTypeImage-07030
    Any VkBufferView being read as a storage texel buffer where the image format field of the OpTypeImage is Unknown then the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiEXT-None-02697
    For each set n that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a VkPipelineLayout that is compatible for set n, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDrawMultiEXT-maintenance4-06425
    If the maintenance4 feature is not enabled, then for each push constant that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a VkPipelineLayout that is compatible for push constants, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDrawMultiEXT-None-08114
    Descriptors in each bound descriptor set, specified via vkCmdBindDescriptorSets, must be valid if they are statically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was not created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiEXT-None-08115
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdBindDescriptorSets, the bound VkPipeline must have been created without VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiEXT-None-08116
    Descriptors in bound descriptor buffers, specified via vkCmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiEXT-None-08117
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdSetDescriptorBufferOffsetsEXT, the bound VkPipeline must have been created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiEXT-None-08119
    If a descriptor is dynamically used with a VkPipeline created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident

  • VUID-vkCmdDrawMultiEXT-None-02700
    A valid pipeline must be bound to the pipeline bind point used by this command

  • VUID-vkCmdDrawMultiEXT-commandBuffer-02701
    If the VkPipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set or inherited (if the VK_NV_inherited_viewport_scissor extension is enabled) for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic

  • VUID-vkCmdDrawMultiEXT-None-02859
    There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the VkPipeline object bound to the pipeline bind point used by this command, since that pipeline was bound

  • VUID-vkCmdDrawMultiEXT-None-02702
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used to sample from any VkImage with a VkImageView of the type VK_IMAGE_VIEW_TYPE_3D, VK_IMAGE_VIEW_TYPE_CUBE, VK_IMAGE_VIEW_TYPE_1D_ARRAY, VK_IMAGE_VIEW_TYPE_2D_ARRAY or VK_IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage

  • VUID-vkCmdDrawMultiEXT-None-02703
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage

  • VUID-vkCmdDrawMultiEXT-None-02704
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage

  • VUID-vkCmdDrawMultiEXT-uniformBuffers-06935
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for uniformBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDrawMultiEXT-storageBuffers-06936
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a storage buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for storageBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDrawMultiEXT-commandBuffer-02707
    If commandBuffer is an unprotected command buffer and protectedNoFault is not supported, any resource accessed by the VkPipeline object bound to the pipeline bind point used by this command must not be a protected resource

  • VUID-vkCmdDrawMultiEXT-None-06550
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must only be used with OpImageSample* or OpImageSparseSample* instructions

  • VUID-vkCmdDrawMultiEXT-ConstOffset-06551
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must not use the ConstOffset and Offset operands

  • VUID-vkCmdDrawMultiEXT-viewType-07752
    If a VkImageView is accessed as a result of this command, then the image view’s viewType must match the Dim operand of the OpTypeImage as described in Instruction/Sampler/Image View Validation

  • VUID-vkCmdDrawMultiEXT-format-07753
    If a VkImageView is accessed as a result of this command, then the image view’s format must match the numeric format from the Sampled Type operand of the OpTypeImage as described in the SPIR-V Sampled Type column of the Interpretation of Numeric Format table

  • VUID-vkCmdDrawMultiEXT-None-04115
    If a VkImageView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the image view’s format

  • VUID-vkCmdDrawMultiEXT-OpImageWrite-04469
    If a VkBufferView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the buffer view’s format

  • VUID-vkCmdDrawMultiEXT-SampledType-04470
    If a VkImageView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDrawMultiEXT-SampledType-04471
    If a VkImageView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDrawMultiEXT-SampledType-04472
    If a VkBufferView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDrawMultiEXT-SampledType-04473
    If a VkBufferView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDrawMultiEXT-sparseImageInt64Atomics-04474
    If the sparseImageInt64Atomics feature is not enabled, VkImage objects created with the VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDrawMultiEXT-sparseImageInt64Atomics-04475
    If the sparseImageInt64Atomics feature is not enabled, VkBuffer objects created with the VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDrawMultiEXT-OpImageWeightedSampleQCOM-06971
    If OpImageWeightedSampleQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_SAMPLED_IMAGE_BIT_QCOM

  • VUID-vkCmdDrawMultiEXT-OpImageWeightedSampleQCOM-06972
    If OpImageWeightedSampleQCOM uses a VkImageView as a sample weight image as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_IMAGE_BIT_QCOM

  • VUID-vkCmdDrawMultiEXT-OpImageBoxFilterQCOM-06973
    If OpImageBoxFilterQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BOX_FILTER_SAMPLED_BIT_QCOM

  • VUID-vkCmdDrawMultiEXT-OpImageBlockMatchSSDQCOM-06974
    If OpImageBlockMatchSSDQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDrawMultiEXT-OpImageBlockMatchSADQCOM-06975
    If OpImageBlockMatchSADQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDrawMultiEXT-OpImageBlockMatchSADQCOM-06976
    If OpImageBlockMatchSADQCOM or OpImageBlockMatchSSDQCOM is used to read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation

  • VUID-vkCmdDrawMultiEXT-OpImageWeightedSampleQCOM-06977
    If OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDrawMultiEXT-OpImageWeightedSampleQCOM-06978
    If any command other than OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must not have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDrawMultiEXT-None-07288
    Any shader invocation executed by this command must terminate

  • VUID-vkCmdDrawMultiEXT-renderPass-02684
    The current render pass must be compatible with the renderPass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDrawMultiEXT-subpass-02685
    The subpass index of the current render pass must be equal to the subpass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDrawMultiEXT-None-07748
    If any shader statically accesses an input attachment, a valid descriptor must be bound to the pipeline via a descriptor set

  • VUID-vkCmdDrawMultiEXT-OpTypeImage-07468
    If any shader executed by this pipeline accesses an OpTypeImage variable with a Dim operand of SubpassData, it must be decorated with an InputAttachmentIndex that corresponds to a valid input attachment in the current subpass

  • VUID-vkCmdDrawMultiEXT-None-07469
    Input attachment views accessed in a subpass must be created with the same VkFormat as the corresponding subpass definition, and be created with a VkImageView that is compatible with the attachment referenced by the subpass' pInputAttachments[InputAttachmentIndex] in the currently bound VkFramebuffer as specified by Fragment Input Attachment Compatibility

  • VUID-vkCmdDrawMultiEXT-None-06537
    Memory backing image subresources used as attachments in the current render pass must not be written in any way other than as an attachment by this command

  • VUID-vkCmdDrawMultiEXT-None-06538
    If any recorded command in the current subpass will write to an image subresource as an attachment, this command must not read from the memory backing that image subresource in any other way than as an attachment

  • VUID-vkCmdDrawMultiEXT-None-06539
    If any recorded command in the current subpass will read from an image subresource used as an attachment in any way other than as an attachment, this command must not write to that image subresource as an attachment

  • VUID-vkCmdDrawMultiEXT-None-06886
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the depth aspect, depth writes must be disabled

  • VUID-vkCmdDrawMultiEXT-None-06887
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the stencil aspect, both front and back writeMask are not zero, and stencil test is enabled, all stencil ops must be VK_STENCIL_OP_KEEP

  • VUID-vkCmdDrawMultiEXT-maxMultiviewInstanceIndex-02688
    If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to VkPhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex

  • VUID-vkCmdDrawMultiEXT-sampleLocationsEnable-02689
    If the bound graphics pipeline was created with VkPipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to VK_TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set

  • VUID-vkCmdDrawMultiEXT-None-06666
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT dynamic state enabled then vkCmdSetSampleLocationsEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-viewportCount-03417
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, then vkCmdSetViewportWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must match the VkPipelineViewportStateCreateInfo::scissorCount of the pipeline

  • VUID-vkCmdDrawMultiEXT-scissorCount-03418
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, then vkCmdSetScissorWithCountEXT must have been called in the current command buffer prior to this drawing command, and the scissorCount parameter of vkCmdSetScissorWithCount must match the VkPipelineViewportStateCreateInfo::viewportCount of the pipeline

  • VUID-vkCmdDrawMultiEXT-viewportCount-03419
    If the bound graphics pipeline state was created with both the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic states enabled then both vkCmdSetViewportWithCountEXT and vkCmdSetScissorWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must match the scissorCount parameter of vkCmdSetScissorWithCount

  • VUID-vkCmdDrawMultiEXT-viewportCount-04137
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportWScalingStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-viewportCount-04138
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportWScalingNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-viewportCount-04139
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportShadingRateImageStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-viewportCount-04140
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportShadingRatePaletteNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-VkPipelineVieportCreateInfo-04141
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportSwizzleStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-VkPipelineVieportCreateInfo-04142
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportExclusiveScissorStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportExclusiveScissorStateCreateInfoNV::exclusiveScissorCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-None-04876
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZER_DISCARD_ENABLE dynamic state enabled then vkCmdSetRasterizerDiscardEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-04877
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_BIAS_ENABLE dynamic state enabled then vkCmdSetDepthBiasEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-logicOp-04878
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LOGIC_OP_EXT dynamic state enabled then vkCmdSetLogicOpEXT must have been called in the current command buffer prior to this drawing command and the logicOp must be a valid VkLogicOp value

  • VUID-vkCmdDrawMultiEXT-primitiveFragmentShadingRateWithMultipleViewports-04552
    If the primitiveFragmentShadingRateWithMultipleViewports limit is not supported, the bound graphics pipeline was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, and any of the shader stages of the bound graphics pipeline write to the PrimitiveShadingRateKHR built-in, then vkCmdSetViewportWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must be 1

  • VUID-vkCmdDrawMultiEXT-blendEnable-04727
    If rasterization is not disabled in the bound graphics pipeline, then for each color attachment in the subpass, if the corresponding image view’s format features do not contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT, then the blendEnable member of the corresponding element of the pAttachments member of pColorBlendState must be VK_FALSE

  • VUID-vkCmdDrawMultiEXT-multisampledRenderToSingleSampled-07284
    If rasterization is not disabled in the bound graphics pipeline, and none of the VK_AMD_mixed_attachment_samples extension, the VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature are enabled, then VkPipelineMultisampleStateCreateInfo::rasterizationSamples must be the same as the current subpass color and/or depth/stencil attachments

  • VUID-vkCmdDrawMultiEXT-imageView-06172
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDrawMultiEXT-imageView-06173
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDrawMultiEXT-imageView-06174
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDrawMultiEXT-imageView-06175
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDrawMultiEXT-imageView-06176
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment

  • VUID-vkCmdDrawMultiEXT-imageView-06177
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment

  • VUID-vkCmdDrawMultiEXT-viewMask-06178
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::viewMask equal to VkRenderingInfo::viewMask

  • VUID-vkCmdDrawMultiEXT-colorAttachmentCount-06179
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::colorAttachmentCount equal to VkRenderingInfo::colorAttachmentCount

  • VUID-vkCmdDrawMultiEXT-colorAttachmentCount-06180
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a VkFormat equal to the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound graphics pipeline

  • VUID-vkCmdDrawMultiEXT-colorAttachmentCount-07616
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView equal to VK_NULL_HANDLE must have the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound pipeline equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDrawMultiEXT-None-07749
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then vkCmdSetColorWriteEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-attachmentCount-07750
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then the attachmentCount parameter of vkCmdSetColorWriteEnableEXT must be greater than or equal to the VkPipelineColorBlendStateCreateInfo::attachmentCount of the currently bound graphics pipeline

  • VUID-vkCmdDrawMultiEXT-None-07751
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DISCARD_RECTANGLE_EXT dynamic state enabled then vkCmdSetDiscardRectangleEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-pDepthAttachment-06181
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDrawMultiEXT-pDepthAttachment-07617
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pDepthAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDrawMultiEXT-pStencilAttachment-06182
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDrawMultiEXT-pStencilAttachment-07618
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingInfo::pStencilAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED

  • VUID-vkCmdDrawMultiEXT-imageView-06183
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingFragmentShadingRateAttachmentInfoKHR::imageView was not VK_NULL_HANDLE, the currently bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR

  • VUID-vkCmdDrawMultiEXT-imageView-06184
    If the current render pass instance was begun with vkCmdBeginRenderingKHR and VkRenderingFragmentDensityMapAttachmentInfoEXT::imageView was not VK_NULL_HANDLE, the currently bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_DENSITY_MAP_ATTACHMENT_BIT_EXT

  • VUID-vkCmdDrawMultiEXT-colorAttachmentCount-06185
    If the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the current render pass instance was begun with vkCmdBeginRenderingKHR with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the corresponding element of the pColorAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline

  • VUID-vkCmdDrawMultiEXT-pDepthAttachment-06186
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDrawMultiEXT-pStencilAttachment-06187
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDrawMultiEXT-multisampledRenderToSingleSampled-07285
    If the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and the current render pass instance was begun with vkCmdBeginRenderingKHR with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline

  • VUID-vkCmdDrawMultiEXT-multisampledRenderToSingleSampled-07286
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView

  • VUID-vkCmdDrawMultiEXT-multisampledRenderToSingleSampled-07287
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineMultisampleStateCreateInfo::rasterizationSamples used to create the currently bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView

  • VUID-vkCmdDrawMultiEXT-renderPass-06198
    If the current render pass instance was begun with vkCmdBeginRenderingKHR, the currently bound pipeline must have been created with a VkGraphicsPipelineCreateInfo::renderPass equal to VK_NULL_HANDLE

  • VUID-vkCmdDrawMultiEXT-primitivesGeneratedQueryWithRasterizerDiscard-06708
    If the primitivesGeneratedQueryWithRasterizerDiscard feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, rasterization discard must not be enabled

  • VUID-vkCmdDrawMultiEXT-primitivesGeneratedQueryWithNonZeroStreams-06709
    If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, the bound graphics pipeline must not have been created with a non-zero value in VkPipelineRasterizationStateStreamCreateInfoEXT::rasterizationStream

  • VUID-vkCmdDrawMultiEXT-None-07619
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_TESSELLATION_DOMAIN_ORIGIN_EXT dynamic state enabled then vkCmdSetTessellationDomainOriginEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07620
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLAMP_ENABLE_EXT dynamic state enabled then vkCmdSetDepthClampEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07621
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_POLYGON_MODE_EXT dynamic state enabled then vkCmdSetPolygonModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07622
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic state enabled then vkCmdSetRasterizationSamplesEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07623
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT dynamic state enabled then vkCmdSetSampleMaskEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07624
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT dynamic state enabled then vkCmdSetAlphaToCoverageEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07625
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_ALPHA_TO_ONE_ENABLE_EXT dynamic state enabled then vkCmdSetAlphaToOneEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07626
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LOGIC_OP_ENABLE_EXT dynamic state enabled then vkCmdSetLogicOpEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07627
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then vkCmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07628
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then vkCmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07629
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then vkCmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07630
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT dynamic state enabled then vkCmdSetRasterizationStreamEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07631
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled then vkCmdSetConservativeRasterizationModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07632
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_EXTRA_PRIMITIVE_OVERESTIMATION_SIZE_EXT dynamic state enabled then vkCmdSetExtraPrimitiveOverestimationSizeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07633
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_ENABLE_EXT dynamic state enabled then vkCmdSetDepthClipEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07634
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT dynamic state enabled then vkCmdSetSampleLocationsEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07635
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then vkCmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07636
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PROVOKING_VERTEX_MODE_EXT dynamic state enabled then vkCmdSetProvokingVertexModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07637
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic state enabled then vkCmdSetLineRasterizationModeEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07638
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT dynamic state enabled then vkCmdSetLineStippleEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07639
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_NEGATIVE_ONE_TO_ONE_EXT dynamic state enabled then vkCmdSetDepthClipNegativeOneToOneEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07640
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_ENABLE_NV dynamic state enabled then vkCmdSetViewportWScalingEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07641
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled then vkCmdSetViewportSwizzleNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07642
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV dynamic state enabled then vkCmdSetCoverageToColorEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07643
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_LOCATION_NV dynamic state enabled then vkCmdSetCoverageToColorLocationNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07644
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_MODE_NV dynamic state enabled then vkCmdSetCoverageModulationModeNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07645
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV dynamic state enabled then vkCmdSetCoverageModulationTableEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07646
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_NV dynamic state enabled then vkCmdSetCoverageModulationTableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07647
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SHADING_RATE_IMAGE_ENABLE_NV dynamic state enabled then vkCmdSetShadingRateImageEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07648
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_REPRESENTATIVE_FRAGMENT_TEST_ENABLE_NV dynamic state enabled then vkCmdSetRepresentativeFragmentTestEnableNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-07649
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV dynamic state enabled then vkCmdSetCoverageReductionModeNV must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-pColorBlendEnables-07470
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT state enabled and the last call to vkCmdSetColorBlendEnableEXT set pColorBlendEnables for any attachment to VK_TRUE, then for those attachments in the subpass the corresponding image view’s format features must contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT

  • VUID-vkCmdDrawMultiEXT-rasterizationSamples-07471
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current subpass does not use any color and/or depth/stencil attachments, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must follow the rules for a zero-attachment subpass

  • VUID-vkCmdDrawMultiEXT-samples-07472
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the VkPipelineMultisampleStateCreateInfo::rasterizationSamples parameter used to create the bound graphics pipeline

  • VUID-vkCmdDrawMultiEXT-samples-07473
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state and VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the rasterizationSamples parameter in the last call to vkCmdSetRasterizationSamplesEXT

  • VUID-vkCmdDrawMultiEXT-multisampledRenderToSingleSampled-07475
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and none of the VK_AMD_mixed_attachment_samples extension, VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature is enabled, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must be the same as the current subpass color and/or depth/stencil attachments

  • VUID-vkCmdDrawMultiEXT-firstAttachment-07476
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then vkCmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendEnableEXT calls must specify an enable for all active color attachments in the current subpass

  • VUID-vkCmdDrawMultiEXT-firstAttachment-07477
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then vkCmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendEquationEXT calls must specify the blend equations for all active color attachments in the current subpass where blending is enabled

  • VUID-vkCmdDrawMultiEXT-firstAttachment-07478
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then vkCmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorWriteMaskEXT calls must specify the color write mask for all active color attachments in the current subpass

  • VUID-vkCmdDrawMultiEXT-firstAttachment-07479
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then vkCmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of vkCmdSetColorBlendAdvancedEXT calls must specify the advanced blend equations for all active color attachments in the current subpass where blending is enabled

  • VUID-vkCmdDrawMultiEXT-advancedBlendMaxColorAttachments-07480
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT and VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic states enabled and the last calls to vkCmdSetColorBlendEnableEXT and vkCmdSetColorBlendAdvancedEXT have enabled advanced blending, then the number of active color attachments in the current subpass must not exceed advancedBlendMaxColorAttachments

  • VUID-vkCmdDrawMultiEXT-primitivesGeneratedQueryWithNonZeroStreams-07481
    If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, and the bound graphics pipeline was created with VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT state enabled, the last call to vkCmdSetRasterizationStreamEXT must have set the rasterizationStream to zero

  • VUID-vkCmdDrawMultiEXT-sampleLocationsPerPixel-07482
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples member of the VkPipelineMultisampleStateCreateInfo structure the bound graphics pipeline has been created with

  • VUID-vkCmdDrawMultiEXT-sampleLocationsPerPixel-07483
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples parameter of the last call to vkCmdSetRasterizationSamplesEXT

  • VUID-vkCmdDrawMultiEXT-sampleLocationsEnable-07484
    If the bound graphics pipeline was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, and the current subpass has a depth/stencil attachment, then that attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set

  • VUID-vkCmdDrawMultiEXT-sampleLocationsEnable-07485
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.width in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::sampleLocationGridSize.width as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples

  • VUID-vkCmdDrawMultiEXT-sampleLocationsEnable-07486
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.height in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::sampleLocationGridSize.height as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples

  • VUID-vkCmdDrawMultiEXT-sampleLocationsEnable-07487
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, the fragment shader code must not statically use the extended instruction InterpolateAtSample

  • VUID-vkCmdDrawMultiEXT-coverageModulationTableEnable-07488
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV state enabled and the last call to vkCmdSetCoverageModulationTableEnableNV set coverageModulationTableEnable to VK_TRUE, then the coverageModulationTableCount parameter in the last call to vkCmdSetCoverageModulationTableNV must equal the current rasterizationSamples divided by the number of color samples in the current subpass

  • VUID-vkCmdDrawMultiEXT-rasterizationSamples-07489
    If the VK_NV_framebuffer_mixed_samples extension is enabled, and if current subpass has a depth/stencil attachment and depth test, stencil test, or depth bounds test are enabled in the currently bound pipeline state, then the current rasterizationSamples must be the same as the sample count of the depth/stencil attachment

  • VUID-vkCmdDrawMultiEXT-coverageToColorEnable-07490
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV state enabled and the last call to vkCmdSetCoverageToColorEnableNV set the coverageToColorEnable to VK_TRUE, then the current subpass must have a color attachment at the location selected by the last call to vkCmdSetCoverageToColorLocationNV coverageToColorLocation, with a VkFormat of VK_FORMAT_R8_UINT, VK_FORMAT_R8_SINT, VK_FORMAT_R16_UINT, VK_FORMAT_R16_SINT, VK_FORMAT_R32_UINT, or VK_FORMAT_R32_SINT

  • VUID-vkCmdDrawMultiEXT-coverageReductionMode-07491
    If this VK_NV_coverage_reduction_mode extension is enabled, the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV and VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, the current coverage reduction mode coverageReductionMode, then the current rasterizationSamples, and the sample counts for the color and depth/stencil attachments (if the subpass has them) must be a valid combination returned by vkGetPhysicalDeviceSupportedFramebufferMixedSamplesCombinationsNV

  • VUID-vkCmdDrawMultiEXT-viewportCount-07492
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-viewportCount-07493
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportSwizzleNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCountEXT

  • VUID-vkCmdDrawMultiEXT-rasterizationSamples-07494
    If the VK_NV_framebuffer_mixed_samples extension is enabled, and if the current subpass has any color attachments and rasterizationSamples of the last call to vkCmdSetRasterizationSamplesEXT is greater than the number of color samples, then the pipeline sampleShadingEnable must be VK_FALSE

  • VUID-vkCmdDrawMultiEXT-stippledLineEnable-07495
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT, then the stippledRectangularLines feature must be enabled

  • VUID-vkCmdDrawMultiEXT-stippledLineEnable-07496
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT, then the stippledBresenhamLines feature must be enabled

  • VUID-vkCmdDrawMultiEXT-stippledLineEnable-07497
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH_EXT, then the stippledSmoothLines feature must be enabled

  • VUID-vkCmdDrawMultiEXT-stippledLineEnable-07498
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_DEFAULT_EXT, then the stippledRectangularLines feature must be enabled and VkPhysicalDeviceLimits::strictLines must be VK_TRUE

  • VUID-vkCmdDrawMultiEXT-conservativePointAndLineRasterization-07499
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled, conservativePointAndLineRasterization is not supported, and the effective primitive topology output by the last pre-rasterization shader stage is a line or point, then the conservativeRasterizationMode set by the last call to vkCmdSetConservativeRasterizationModeEXT must be VK_CONSERVATIVE_RASTERIZATION_MODE_DISABLED_EXT

  • VUID-vkCmdDrawMultiEXT-stage-07073
    If the currently bound pipeline was created with the VkPipelineShaderStageCreateInfo::stage member of an element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT or VK_SHADER_STAGE_GEOMETRY_BIT, then Mesh Shader Queries must not be active

  • VUID-vkCmdDrawMultiEXT-commandBuffer-02712
    If commandBuffer is a protected command buffer and protectedNoFault is not supported, any resource written to by the VkPipeline object bound to the pipeline bind point used by this command must not be an unprotected resource

  • VUID-vkCmdDrawMultiEXT-commandBuffer-02713
    If commandBuffer is a protected command buffer and protectedNoFault is not supported, pipeline stages other than the framebuffer-space and compute stages in the VkPipeline object bound to the pipeline bind point used by this command must not write to any resource

  • VUID-vkCmdDrawMultiEXT-commandBuffer-04617
    If any of the shader stages of the VkPipeline bound to the pipeline bind point used by this command uses the RayQueryKHR capability, then commandBuffer must not be a protected command buffer

  • VUID-vkCmdDrawMultiEXT-None-04007
    All vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must have either valid or VK_NULL_HANDLE buffers bound

  • VUID-vkCmdDrawMultiEXT-None-04008
    If the nullDescriptor feature is not enabled, all vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must not be VK_NULL_HANDLE

  • VUID-vkCmdDrawMultiEXT-None-02721
    For a given vertex buffer binding, any attribute data fetched must be entirely contained within the corresponding vertex buffer binding, as described in Vertex Input Description

  • VUID-vkCmdDrawMultiEXT-dynamicPrimitiveTopologyUnrestricted-07500
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PRIMITIVE_TOPOLOGY_EXT dynamic state enabled and the dynamicPrimitiveTopologyUnrestricted is VK_FALSE, then the primitiveTopology parameter in the last call to vkCmdSetPrimitiveTopologyEXT must be of the same topology class as the pipeline VkPipelineInputAssemblyStateCreateInfo::topology state

  • VUID-vkCmdDrawMultiEXT-None-04912
    If the bound graphics pipeline was created with both the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT and VK_DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic states enabled, then vkCmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command

  • VUID-vkCmdDrawMultiEXT-pStrides-04913
    If the bound graphics pipeline was created with the VK_DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic state enabled, but not the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled, then vkCmdBindVertexBuffers2EXT must have been called in the current command buffer prior to this draw command, and the pStrides parameter of vkCmdBindVertexBuffers2EXT must not be NULL

  • VUID-vkCmdDrawMultiEXT-None-04914
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled, then vkCmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command

  • VUID-vkCmdDrawMultiEXT-None-04875
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PATCH_CONTROL_POINTS_EXT dynamic state enabled then vkCmdSetPatchControlPointsEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-None-04879
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE dynamic state enabled then vkCmdSetPrimitiveRestartEnableEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiEXT-stage-06481
    The bound graphics pipeline must not have been created with the VkPipelineShaderStageCreateInfo::stage member of an element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_TASK_BIT_EXT or VK_SHADER_STAGE_MESH_BIT_EXT

  • VUID-vkCmdDrawMultiEXT-None-04933
    The multiDraw feature must be enabled

  • VUID-vkCmdDrawMultiEXT-drawCount-04934
    drawCount must be less than VkPhysicalDeviceMultiDrawPropertiesEXT::maxMultiDrawCount

  • VUID-vkCmdDrawMultiEXT-drawCount-04935
    If drawCount is greater than zero, pVertexInfo must be a valid pointer to memory containing one or more valid instances of VkMultiDrawInfoEXT structures

  • VUID-vkCmdDrawMultiEXT-stride-04936
    stride must be a multiple of 4

Valid Usage (Implicit)
  • VUID-vkCmdDrawMultiEXT-commandBuffer-parameter
    commandBuffer must be a valid VkCommandBuffer handle

  • VUID-vkCmdDrawMultiEXT-commandBuffer-recording
    commandBuffer must be in the recording state

  • VUID-vkCmdDrawMultiEXT-commandBuffer-cmdpool
    The VkCommandPool that commandBuffer was allocated from must support graphics operations

  • VUID-vkCmdDrawMultiEXT-renderpass
    This command must only be called inside of a render pass instance

  • VUID-vkCmdDrawMultiEXT-videocoding
    This command must only be called outside of a video coding scope

Host Synchronization
  • Host access to commandBuffer must be externally synchronized

  • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties
Command Buffer Levels Render Pass Scope Video Coding Scope Supported Queue Types Command Type

Primary
Secondary

Inside

Outside

Graphics

Action

To record an ordered sequence of indexed drawing operations which have no state changes between them, call:

// Provided by VK_EXT_multi_draw
void vkCmdDrawMultiIndexedEXT(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    drawCount,
    const VkMultiDrawIndexedInfoEXT*            pIndexInfo,
    uint32_t                                    instanceCount,
    uint32_t                                    firstInstance,
    uint32_t                                    stride,
    const int32_t*                              pVertexOffset);
  • commandBuffer is the command buffer into which the command is recorded.

  • drawCount is the number of draws to execute, and can be zero.

  • pIndexInfo is a pointer to an array of VkMultiDrawIndexedInfoEXT with index information to be drawn.

  • instanceCount is the number of instances to draw.

  • firstInstance is the instance ID of the first instance to draw.

  • stride is the byte stride between consecutive elements of pIndexInfo.

  • pVertexOffset is NULL or a pointer to the value added to the vertex index before indexing into the vertex buffer. When specified, VkMultiDrawIndexedInfoEXT::offset is ignored.

drawCount indexed draws are executed with parameters taken from pIndexInfo. The number of draw commands recorded is drawCount, with each command reading, sequentially, a firstIndex and an indexCount from pIndexInfo. If pVertexOffset is NULL, a vertexOffset is also read from pIndexInfo, otherwise the value from dereferencing pVertexOffset is used.

Valid Usage
  • VUID-vkCmdDrawMultiIndexedEXT-magFilter-04553
    If a VkSampler created with magFilter or minFilter equal to VK_FILTER_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-mipmapMode-04770
    If a VkSampler created with mipmapMode equal to VK_SAMPLER_MIPMAP_MODE_LINEAR and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-None-06479
    If a VkImageView is sampled with depth comparison, the image view’s format features must contain VK_FORMAT_FEATURE_2_SAMPLED_IMAGE_DEPTH_COMPARISON_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-None-02691
    If a VkImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-None-02692
    If a VkImageView is sampled with VK_FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT

  • VUID-vkCmdDrawMultiIndexedEXT-filterCubic-02694
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT as a result of this command must have a VkImageViewType and format that supports cubic filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDrawMultiIndexedEXT-filterCubicMinmax-02695
    Any VkImageView being sampled with VK_FILTER_CUBIC_EXT with a reduction mode of either VK_SAMPLER_REDUCTION_MODE_MIN or VK_SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a VkImageViewType and format that supports cubic filtering together with minmax filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by vkGetPhysicalDeviceImageFormatProperties2

  • VUID-vkCmdDrawMultiIndexedEXT-flags-02696
    Any VkImage created with a VkImageCreateInfo::flags containing VK_IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a VkSamplerAddressMode of VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE

  • VUID-vkCmdDrawMultiIndexedEXT-OpTypeImage-07027
    For any VkImageView being written as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-OpTypeImage-07028
    For any VkImageView being read as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-OpTypeImage-07029
    For any VkBufferView being written as a storage texel buffer where the image format field of the OpTypeImage is Unknown, the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-OpTypeImage-07030
    Any VkBufferView being read as a storage texel buffer where the image format field of the OpTypeImage is Unknown then the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT

  • VUID-vkCmdDrawMultiIndexedEXT-None-02697
    For each set n that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a VkPipelineLayout that is compatible for set n, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDrawMultiIndexedEXT-maintenance4-06425
    If the maintenance4 feature is not enabled, then for each push constant that is statically used by the VkPipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a VkPipelineLayout that is compatible for push constants, with the VkPipelineLayout used to create the current VkPipeline, as described in Pipeline Layout Compatibility

  • VUID-vkCmdDrawMultiIndexedEXT-None-08114
    Descriptors in each bound descriptor set, specified via vkCmdBindDescriptorSets, must be valid if they are statically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was not created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiIndexedEXT-None-08115
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdBindDescriptorSets, the bound VkPipeline must have been created without VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiIndexedEXT-None-08116
    Descriptors in bound descriptor buffers, specified via vkCmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiIndexedEXT-None-08117
    If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdSetDescriptorBufferOffsetsEXT, the bound VkPipeline must have been created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT

  • VUID-vkCmdDrawMultiIndexedEXT-None-08119
    If a descriptor is dynamically used with a VkPipeline created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident

  • VUID-vkCmdDrawMultiIndexedEXT-None-02700
    A valid pipeline must be bound to the pipeline bind point used by this command

  • VUID-vkCmdDrawMultiIndexedEXT-commandBuffer-02701
    If the VkPipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set or inherited (if the VK_NV_inherited_viewport_scissor extension is enabled) for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic

  • VUID-vkCmdDrawMultiIndexedEXT-None-02859
    There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the VkPipeline object bound to the pipeline bind point used by this command, since that pipeline was bound

  • VUID-vkCmdDrawMultiIndexedEXT-None-02702
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used to sample from any VkImage with a VkImageView of the type VK_IMAGE_VIEW_TYPE_3D, VK_IMAGE_VIEW_TYPE_CUBE, VK_IMAGE_VIEW_TYPE_1D_ARRAY, VK_IMAGE_VIEW_TYPE_2D_ARRAY or VK_IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage

  • VUID-vkCmdDrawMultiIndexedEXT-None-02703
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage

  • VUID-vkCmdDrawMultiIndexedEXT-None-02704
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage

  • VUID-vkCmdDrawMultiIndexedEXT-uniformBuffers-06935
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for uniformBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDrawMultiIndexedEXT-storageBuffers-06936
    If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a storage buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for storageBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point

  • VUID-vkCmdDrawMultiIndexedEXT-commandBuffer-02707
    If commandBuffer is an unprotected command buffer and protectedNoFault is not supported, any resource accessed by the VkPipeline object bound to the pipeline bind point used by this command must not be a protected resource

  • VUID-vkCmdDrawMultiIndexedEXT-None-06550
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must only be used with OpImageSample* or OpImageSparseSample* instructions

  • VUID-vkCmdDrawMultiIndexedEXT-ConstOffset-06551
    If the VkPipeline object bound to the pipeline bind point used by this command accesses a VkSampler or VkImageView object that enables sampler Y′CBCR conversion, that object must not use the ConstOffset and Offset operands

  • VUID-vkCmdDrawMultiIndexedEXT-viewType-07752
    If a VkImageView is accessed as a result of this command, then the image view’s viewType must match the Dim operand of the OpTypeImage as described in Instruction/Sampler/Image View Validation

  • VUID-vkCmdDrawMultiIndexedEXT-format-07753
    If a VkImageView is accessed as a result of this command, then the image view’s format must match the numeric format from the Sampled Type operand of the OpTypeImage as described in the SPIR-V Sampled Type column of the Interpretation of Numeric Format table

  • VUID-vkCmdDrawMultiIndexedEXT-None-04115
    If a VkImageView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the image view’s format

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageWrite-04469
    If a VkBufferView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the buffer view’s format

  • VUID-vkCmdDrawMultiIndexedEXT-SampledType-04470
    If a VkImageView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDrawMultiIndexedEXT-SampledType-04471
    If a VkImageView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDrawMultiIndexedEXT-SampledType-04472
    If a VkBufferView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64

  • VUID-vkCmdDrawMultiIndexedEXT-SampledType-04473
    If a VkBufferView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32

  • VUID-vkCmdDrawMultiIndexedEXT-sparseImageInt64Atomics-04474
    If the sparseImageInt64Atomics feature is not enabled, VkImage objects created with the VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDrawMultiIndexedEXT-sparseImageInt64Atomics-04475
    If the sparseImageInt64Atomics feature is not enabled, VkBuffer objects created with the VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageWeightedSampleQCOM-06971
    If OpImageWeightedSampleQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_SAMPLED_IMAGE_BIT_QCOM

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageWeightedSampleQCOM-06972
    If OpImageWeightedSampleQCOM uses a VkImageView as a sample weight image as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_IMAGE_BIT_QCOM

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageBoxFilterQCOM-06973
    If OpImageBoxFilterQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BOX_FILTER_SAMPLED_BIT_QCOM

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageBlockMatchSSDQCOM-06974
    If OpImageBlockMatchSSDQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageBlockMatchSADQCOM-06975
    If OpImageBlockMatchSADQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageBlockMatchSADQCOM-06976
    If OpImageBlockMatchSADQCOM or OpImageBlockMatchSSDQCOM is used to read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageWeightedSampleQCOM-06977
    If OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDrawMultiIndexedEXT-OpImageWeightedSampleQCOM-06978
    If any command other than OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must not have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM

  • VUID-vkCmdDrawMultiIndexedEXT-None-07288
    Any shader invocation executed by this command must terminate

  • VUID-vkCmdDrawMultiIndexedEXT-renderPass-02684
    The current render pass must be compatible with the renderPass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDrawMultiIndexedEXT-subpass-02685
    The subpass index of the current render pass must be equal to the subpass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS

  • VUID-vkCmdDrawMultiIndexedEXT-None-07748
    If any shader statically accesses an input attachment, a valid descriptor must be bound to the pipeline via a descriptor set

  • VUID-vkCmdDrawMultiIndexedEXT-OpTypeImage-07468
    If any shader executed by this pipeline accesses an OpTypeImage variable with a Dim operand of SubpassData, it must be decorated with an InputAttachmentIndex that corresponds to a valid input attachment in the current subpass

  • VUID-vkCmdDrawMultiIndexedEXT-None-07469
    Input attachment views accessed in a subpass must be created with the same VkFormat as the corresponding subpass definition, and be created with a VkImageView that is compatible with the attachment referenced by the subpass' pInputAttachments[InputAttachmentIndex] in the currently bound VkFramebuffer as specified by Fragment Input Attachment Compatibility

  • VUID-vkCmdDrawMultiIndexedEXT-None-06537
    Memory backing image subresources used as attachments in the current render pass must not be written in any way other than as an attachment by this command

  • VUID-vkCmdDrawMultiIndexedEXT-None-06538
    If any recorded command in the current subpass will write to an image subresource as an attachment, this command must not read from the memory backing that image subresource in any other way than as an attachment

  • VUID-vkCmdDrawMultiIndexedEXT-None-06539
    If any recorded command in the current subpass will read from an image subresource used as an attachment in any way other than as an attachment, this command must not write to that image subresource as an attachment

  • VUID-vkCmdDrawMultiIndexedEXT-None-06886
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the depth aspect, depth writes must be disabled

  • VUID-vkCmdDrawMultiIndexedEXT-None-06887
    If the current render pass instance uses a depth/stencil attachment with a read-only layout for the stencil aspect, both front and back writeMask are not zero, and stencil test is enabled, all stencil ops must be VK_STENCIL_OP_KEEP

  • VUID-vkCmdDrawMultiIndexedEXT-maxMultiviewInstanceIndex-02688
    If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to VkPhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex

  • VUID-vkCmdDrawMultiIndexedEXT-sampleLocationsEnable-02689
    If the bound graphics pipeline was created with VkPipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to VK_TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set

  • VUID-vkCmdDrawMultiIndexedEXT-None-06666
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT dynamic state enabled then vkCmdSetSampleLocationsEXT must have been called in the current command buffer prior to this drawing command

  • VUID-vkCmdDrawMultiIndexedEXT-viewportCount-03417
    If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, then vkCmdSetViewportWithCountEXT must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must match the VkPipelineViewportStateCreateInfo::scissorC